Configuring the Network Interface
After connecting the printer to the network, you need to configure the network
interface for use on a TCP/IP network. The following items are used to make
network settings on the printer's control panel (available only when
NETWORK SETUP is set to ENABLE):
Item
NETWORK SETUP
IP ADDRESS SETTING
IP,SM,DG SETTING
WSD
BONJOUR
INIT NETWORK SETTING
Follow these steps to set the IP address, subnet mask, and default gateway
from the control panel:
1. Make sure that the printer is turned on, and the LCD displays READY.
2. Press the Menu r button on the printer to enter the printer's menu system.
3. Press d to highlight NETWORK SETUP, then press r.
4. Press r, then d to highlight SHOW.
5. Press OK. A checkmark (✓) appears next to SHOW to show that it's
selected.
6. Press l to go back, then press d to highlight IP ADDRESS SETTING.
Parameter
HIDE, SHOW
AUTO, PANEL
IP ADDRESS
000.000.000.000 to 255.255.255.255
(default setting is 192.168.192.168)
SUBNET MASK
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.000)
DEFAULT GATEWAY
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.255)
ON, OFF
ON, OFF
EXECUTE
Setting Up Your System for Network Printing
17