■ Connecting multiple cables simultaneously as a group
You must select consecutive connector numbers for group connection.
NOTE
1. Click the [OUT] connector of the node that outputs the signal.
mLAN Graphic Patchbay displays the Output Connectors window.
2. In the Output Connectors window, click the box next to the number of the first
output connector to be connected.
3. While pressing and holding down the <Shift> key on the computer keyboard, click
the box next to the number of the last output connector to be connected.
A virtual cable connector appears in each of the output connector boxes in the range specified in
Steps 2 and 3.
4. Click the [IN] connector of the node that receives the input signal.
mLAN Graphic Patchbay displays the Input Connectors window.
5. Click the box next to the number of the first input connector targeted for group
connection.
29