Connect The Power Cord - Yamaha Clavinova CLP-480 Owner's Manual

Insert the pedal cord securely
until the metal part of the cord
plug disappears from view.
Otherwise, the pedal may not
function properly.
7.
Attach C.
7-1
Place on D, the stopper-wood at the bottom
edges of C, then secure the top.
7-2
Secure the upper right, left, and center parts
of C using three 4 x 14 mm thin screws.
7-3
Secure the lower part of C using four 4 x 20
mm tapping screws.
7-1
D
C
7-3
8.

Connect the power cord.

8-1
For models that feature a voltage selector:
Set the voltage selector to an appropriate
voltage.
Voltage Selector
Before connecting the AC power cord, check the
setting of the voltage selector which is provided in
some areas. To set the selector for 110V, 127V, 220V
or 240V main voltages, use a "minus" screwdriver to
rotate the selector dial so that the correct voltage for
your region appears next to the pointer on the panel.
The voltage selector is set at 240V when the unit is
initially shipped. After the proper voltage has been
selected, connect the AC power cord to the AC IN
and an AC wall outlet. A plug adaptor may be also
provided in some areas to match the pin
configuration of the AC wall outlets in your area.
7-2
C
WARNING
An improper voltage setting can cause serious damage to the
instrument or result in improper operation.
8-2
Insert the plug of the power cord into the
power connector.
8-1
240
127
9.
Set the adjuster.
Rotate the adjuster until the pedal box comes in
firm contact with the floor surface.
10.
Attach the headphone hanger.
Use the included two screws (4 x 10 mm) to attach
the hanger as shown in the illustration.
8-2
Appendix
85
Assembling the Clavinova