Retransmit - Dell PowerEdge M420 Reference Manual

timeout — Specifies the timeout value in seconds. (Range: 1–30)
•
Default Configuration
The default value is 3 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the interval for which a switch waits for a server
host to reply to 5 seconds.
console(config)#radius-server timeout 5

retransmit

Use the retransmit command in Radius mode to specify the number of times
the Radius client retransmits requests to the Radius server.
Syntax
retries
retransmit
retries — Specifies the retransmit value. (Range: 1-10 attempts)
•
Default Configuration
The default number for attempts is 3.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
666
RADIUS Commands