Receiving Faxes - Canon 3301B002 On-Screen Manual

Receiving Faxes

>
Contents Faxing > Receiving Faxes
Receiving Faxes
This section describes the operation to receive a fax with the machine depending on the receive mode.
This section also describes the operation to print documents stored in the memory of the machine such
as when an error occurred.
Preparing for Receiving a Fax
Receiving a Fax in Each Receive Mode
Receiving a Fax in the Memory of the Machine (Memory Receiving)
Preparing for Receiving a Fax
Prepare for receiving a fax according to the following procedure.
1.
Make sure that the power is turned on.
Operation Panel .
See
2.
Make sure of the receive mode setting.
Setting the Receive Mode
See
3.
Load the paper for printing.
Loading Paper
See .
When a fax is received, the machine feeds plain paper from the paper source for plain paper and print on them.
The machine is set to feed plain paper from the Cassette by default.
For setting the paper source for plain paper, refer to the on-screen manual:
4.
Specify the paper for printing.
Press the FAX button.
(1)
Press the Settings button.
(2)
The Fax paper settings screen will appear.
Specify the page size.
(3)
You can specify A4, 8.5"x11"(LTR), or 8.5"x14"(Legal).
Select the automatic feed switch.
(4)
OFF: Feeds plain paper in the paper source for plain paper.
ON: If plain papers run out either in the Cassette or Rear Tray, the machine automatically switches to
another paper source.
Press the Settings button.
(5)
The specified settings will be selected.
Receiving a Fax in Each Receive Mode
Note
If you want to use a single telephone line for faxes and voice calls, you need to connect a
.
Advanced Guide Troubleshooting
.
Advanced Guide
Page 87 of 997 pages