Chapter 4
Cisco SME Cluster Management
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Standard Security Confirmation and Stored Keyshares
For the standard security level, follow these steps:
Step 1
In the Confirmation screen, click Confirm to create the cluster.
A Store Keyshares screen opens. After the smart card applet finishes loading, click Next.
Step 2
When entering smart card information, note the following:
•
•
•
Enter the switch login information (username and password used to log in to Fabric Manager), the PIN
Step 3
number for the smart card, and a label that will identify the smart card. The PIN number and label were
defined during the smart card initialization. Click Next.
OL-18091-01, Cisco MDS NX-OS Release 4.x
Be sure that the smart card reader is connected using the USB port (see the
Drivers" section on page 2-17
When you insert a smart card into the reader, the card will be verified. You will be prompted to
initialize the card if the card has not been previously initialized.
Make sure that you have the appropriate smart card drivers installed before proceeding.
Creating a Cisco SME Cluster Using the Cisco SME Wizard
in
Chapter 2, "Getting
Started").
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
"Installing Smart Card
4-13