8.
Highlight Type and press Enter. Select Local Parallel, LPT1.
Press Esc; then press Enter to save changes.
9.
10. Press Esc.
11. Select Queues Serviced by Printer from the Print Server
Configuration Menu and press Enter.
12. Select the printer that you want to use from the Defined Printers
list and press Enter.
13. Press the Insert key and assign a queue to the print server port
from the Available Queues list.
14. Specify the priority level between 1 and 10. One is the highest
priority.
15. Press Esc to exit PCONSOLE.
Configuring the Ethernet card
This section explains how to configure the printer using EPSON
Net!2.
4-6 Using the Ethernet Card with NetWare