NOTE
If you cancel the call, press OK during the dialing.
•
•
If the system does not answer the call within about 120 seconds, your system will be disconnected automatically.
•
Check the IP address of the system before you place a call. If you do not set the IP address correctly or set the wrong IP address, you can
not make a call.
Placing a Call from the Call History
The list of the Call History stores up to 10 recently dialed phone numbers. The oldest entry in the list is automatically removed when the
system receives a call or places a call after the maximum number of entries has been reached. The last call placed always appears first on the
list.
1. From the main screen, press the upper arrow button. The Call History tab is expanded.
2. Use the left
or right
3. Press OK to place a call. The call status dialog box is displayed.
NOTE
To cancel the call, press OK during the dialing.
Placing a Call from the Directory
The directory stores a list of names and numbers from which you can place calls. To place a call from the directory, follow these steps:
1. From the main screen, press DIRECTORY on the remote control or select [Directory] on the main screen and press OK to access the
directory.
2. Use the arrow buttons to select the entry that you wish to dial.
3. Press OK to place the call. The call status dialog box is displayed.
NOTE
Refer to the Directory setting section for more details.
button to select an entry.
Operation
41
4