3. Basic operations
3-9. Switching the AUX output
The user can switch the AUX output signals.
The signals of any of the AUX bus crosspoint button 1 to 10, PGM (program) signals, PVW (preview) signals or
CLN (clean) signals can be selected for output to the AUX bus.
[PGM]: The PGM signals are output to the AUX bus.
[PVW]: The PVW signals are output to the AUX bus.
[CLN]: The clean signals (images whose DSK signals have been removed from the PGM signals) are output to
the AUX bus.
Selecting the output signals using the crosspoint buttons
Press the [AUX] button among the AUX bus selector buttons to light its indicator, and press one of the AUX bus
crosspoint buttons 1 to 10, CLN, PVW or PGM button to select the AUX output signals.
The indicators of the [AUX] button and the selected button light in amber.
(They light in red if the selected signal is being output to the PGM connector.)
AUX
AMB:FILL / GRN:SOURCE
KEY
DSK
PinP
AUX BUS DELEGATION
AUX
CLN
PVW
PGM
AUX SOURCE
48