Epson P4000 - Multimedia Storage Viewer Product Support Bulletin page 10

6. The firmware process is completed when you see the message "Resources Updated
Successfully" displayed on the screen.
7. When you see the message "Shutdown Restart Device", power off the unit and remove
the CompactFlash or SD memory card.
8. When you power on the unit, you will be prompted to select the language and set the
date and time. To confirm the new firmware version, select Settings in the Home Menu.
The firmware version is located on the lower right side of the screen. It should say
04.51.
Page 4 of 4
PSB.2005.12.001