Haier 26T32 User Manual page 25

Auto Search
After selecting Auto Search, press "Left/Right"
key on the remote control or "VOL+/VOL-" key on
front panel to enter into submenu of Auto Search(Fig.16),
the machine begin searching toward low frequency or high frequency. All of the TV
programs will be saved automatically.
In the process of searching the channel automatically, press the key of ''MENU'' on
the remote control to stop searching and exit menu operation.
Select Channels with "CH+/CH-" Key
Press Program key on the remote control or "CH+/ CH-" key on the front panel to
select the channels.
Select channels with the Return key you can go to the last channel when pressing
the Return key. For example, if the last channel is 10 and the current channel is 20,
you will go to channel 10 when pressing the Return key. You can switch the two
favourite channels as you like.
Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly .
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.
Note: With the mode of
all functions and adjustments are similar with TV. User can check it at convenience.
HDMI connector can realize DVI connector function with external HDMI/DVI
commutator.
Basic Operation Instruction
TV, AV1, AV2, SVIDEO1, SVIDEO2, YPbPr, VGA, HDMI
23
Auto Search Channel 65
Fig.16
59 . 75
Frequenly
MHz
MENU
,