Chapter 5
Advanced Configuration on Mac OS 9.x
Configuring Your Client Adapter
Setting Advanced Ad Hoc Parameters
You can set advanced ad hoc parameters only if your client adapter has been set to operate in an ad
Note
hoc network. See the Network Type parameter in the "Setting System Parameters" section on
page 5-7.
The Advanced screen (see Figure 5-9) enables you to set parameters that control how the client adapter
operates within an ad hoc network. To access this screen, select Edit Properties from the File pull-down
menu (see Figure 5-5 on page 5-7) and click the Advanced tab.
Figure 5-9
Advanced Screen
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
5-18
OL-1377-01