Sound Command; Cf_Volume Command; Cf_Mute Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications

8.9 Sound Command

8.9.1

CF_VOLUME Command

Command "CF_VOLUME_%1" [CR]
"000~010"
%1 "UP" --------------------------- Turn UP the volume by 1step
"DN" --------------------------- Turn DOWN the volume by 1step
Set value of Volume. (Valid only in the normal Power ON status.)
The command behaves the same as remote control, which adjusts volume
directly and release the sound-mute function.
Details
The value set by this command is stored in EEPROM and the setting value
remains after the power is ALL OFF.
Projector shows indication display when receiving the command.
Acceptable
Correspondence
Unacceptable
8.9.2

CF_MUTE Command

Command "CF_MUTE_%1" [CR]
"ON" ----------------------------- Set Sound Mute ON
%1
"OFF" --------------------------- Set Sound Mute OFF
Set/Cancel Sound Mute. (Valid only when in the normal Power ON status.)
Details
Display OSD when projector received command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
23 / 42