Configuration; Web-Based Configuration Utility - D-Link DVG-3104MS - VoiceCenter PSTN Gateway User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link DVG-3104MS Gateway using the web-based configuration
utility. Although this device has a built-in Web Interface, it is suggested that you do not make any changes manually.
All configuration changes should be made through the Microsoft Response Point software program only. In addition,
® ™
some of the features listed in the Web Interface are not compatible with the DVX-2000MS Base Unit that this gateway
is designed to work with.

Web-based Configuration Utility

To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address
of the gateway. The gateway should get a DHCP IP
address automatically. You will need to add 9999 at
the end of the IP Address. (i.e. 192.168.0.1:9999)
Note: The IP address will default to 192.168.0.20
when there is no DHCP server available.
Enter admin as the default username and password.
Click OK to continue.
D-Link DVG-3104MS User Manual 1