Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Wireless Mode:
Displays the Wi-Fi.Hot.Spot.Mode.
Wireless
When you are browsing for available wireless networks,
Network Name:
this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID.
Channel Width:
Select the appropriate channel width between 20MHz
or Auto.20/40MHz from the drop-down menu.
Security Mode:
Select WEP or WPA Personal.
D-Link DIR-505 User Manual
Setup
Wi-Fi Hot Spot Setup
126