HP 4400 Release Note page 29

Table 7 Web Tools functionality in DCFM (continued)
Function
Device accessibility matrix
Fabric events
Fabric summary
FCIP tunnel configuration
GigE ports interface
GigE ports route
Non-local switch ports
display in zoning tree
Remove offline or
inaccessible devices
Zone database summary
ping
1 Viewing FCIP tunnels is supported in Web Tools 6.1.1, but New, Edit Config, and Delete are available only in DCFM.
2 In Web Tools, non-local switch port id/WWN can be added using text box.
Encryption behavior
HP recommends that the encrypted LUN containers be created when all of the nodes/Encryption
Engines (EE) in the Data Encryption Key (DEK)/High Availability Cluster (HAC) are up and
enabled.
If two EEs are part of a HAC, configure the host/target pair such that they form a multipath
from both EEs. Avoid connecting both host/target pairs to the same EE. This connectivity does
not provide full redundancy when EE failure results in HAC failover.
LUN configuration
The following process is to be used then when configuring a LUN for encryption:
◦
–
–
◦ An exception to this LUN configuration process: if the LUN was previously encrypted by
the HP encryption switch or HP encryption blade, the LUN can be added to the Crypto
Target Container with the encrypt and lunstate ="encrypted" options.
◦ LUN configurations must be committed to take effect. No more than 25 LUNs can be
added or modified in a single commit operation. Attempts to commit configurations that
Web Tools 6.1.0
Zone Admin
Monitor > Fabric events
Reports > Fabric summary
1
Port Admin Module, GigE tab
Port Admin Module, GigE tab
Port Admin Module, GigE tab
Zone Admin
Admin Domain
Switch Admin > DCC policies
Performance Monitoring
Zone Admin
Zone Admin
Add the LUN as clear-text to the Crypto Target Container (CTC).
When the LUN comes online and clear-text host I/O starts, modify the LUN from
clear-text to encrypt, including the enable_encexistingdata option to convert
the LUN from clear-text to encrypted.
Configure > Zoning
The Compare dialog provides the Storage-Host and
Host-Storage view in a tree representation that is
comparable to the Device Accessibility Matrix when all
devices are selected.
Monitor > Logs > Events
Monitor > Reports > Fabric
Summary report
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > Zoning
2
Configure > Zoning
Replace/Replace All zone members by selecting the
offline devices from the zone tree. Offline devices have
an unknown overlay badge with good visibility.
Configure > Zoning
Zoning report for both online and offline database
DCFM
Encryption behavior 29