Sony BVM-E250 Operation Manual page 96

RGB Range: Displays RGB Range set in the Channel
Configuration menu.
1080I/PsF: Displays 1080I/PsF set in the Channel
Configuration menu.
Scan Mode: Displays the selected scan mode.
Aspect Mode: Displays the selected aspect ratio.
Interlace Display: Displays On/Off of the interlace
display.
Page 2/3
Information on the picture adjustments is displayed.
STATUS (Picture Configuration)
Color Profile: BVM EBU
Color Space: EBU
Gamma: CRT BVM
Color Temp: User1
Picture Preset: Preset1
Chroma: 1000
Bright:
Contrast: 1000
Matrix: ITU-R BT.709
Color Profile: Displays Color Profile set in the Channel
Configuration menu.
Color Space: Displays Color Space set in Color Profile
Gamma: Displays Gamma set in Color Profile
Color Temp: Displays Color Temp set in the Channel
Configuration menu.
Picture Preset: Displays Picture Preset set in the Channel
Configuration menu.
Chroma: Displays the Chroma value of the selected
Picture Preset.
Bright: Displays the Bright value of the selected Picture
Preset.
Contrast: Displays the Contrast value of the selected
Picture Preset.
Matrix: Displays Matrix set in the Channel Configuration
menu.
Page 3/3
When the SDI signal is input
The same information as that of SDI Payload ID Status in
the System Status menu is displayed.
96
Displaying the Monitor Status Page
v
2/3
V
000
STATUS (SDI Payload ID)
Option1/Input1
Payload ID B1 B2 B3 B4
Video Standard: HD-SDI
Sampling Structure: 4:2:2 Y/Cb/Cr
Bit Depth: 10bit
Picture Rate: 59.94
Scanning Method : Interlace/Interlace
Link Number : Single/Link_1
Current Status
Format: HD 422 YCbCr 10
I/PsF/P: Interlace
OptionX/InputX: Input port and input connector of the
displayed information
Standard or Option1 to 4 is displayed as an input port, and
Input1 or Input2 is displayed as an input connector.
Payload ID: Displays the 4-byte data for Payload ID of the
SMPTE-352M standard in hexadecimal in sequence of
Byte 1, Byte 2, Byte 3 and Byte 4.
When the Payload ID information is not set, only Current
Status is displayed, and "---" is displayed for other items.
When the following information is not decoded, Unknown
is displayed.
Video Standard: Decode display of Byte 1_Bit 6-0
Sampling Structure: Decode display of Byte 3_Bit 3-0
Bit Depth: Decode display of Byte 4_Bit 1-0
Picture Rate: Decode display of Byte 2_Bit 3-0
Scanning Method: Decode display of Byte 2_Bit 7 /
Byte 2_Bit 6
Link Number: Decode display of Byte 4_Bit 7-6
Current Status: Displays the current status of the monitor.
Format: Displayed as "Video Standard + Sampling
Structure + Bit Depth".
Video Standard: 3G / DL / HD / SD
Sampling Structure: 422 YCbCr / 444 YCbCr / 444
RGB / 444 XYZ
Bit Depth: 10 / 12
I/PsF/P: Interlace / PsF / Progressive
When the HDMI/DisplayPort signal is input
The same information as that of HDMI/DP Status in the
System Status menu is displayed.
HDMI signal
STATUS (HDMI)
Pixel Encoding: YCbCr 4:4:4
Color Depth: 12bit
Matrix: ITU-R BT.601
RGB Range: ---
v
3/3
V
v
3/3
V