Table of Contents
Advertisement
To connect to the console
1. Turn off power to the gateway.
2. Connect the supplied null-modem cable (console cable) to the console
3. Connect the other end of the cable to a system running a
4. Make sure that you have a terminal emulator configured with the settings
5. Turn on power to the gateway.
Console Pin Assignments
Use the built-in console port to supply the information that makes the gateway
available on the network. Use the built-in serial port (AUX) for RS232-
compliant equipment you are using with your gateway; for example, as a
modem connection for managing the gateway.
assignment information for console and serial connections.
Nokia 5i and 10i Installation Guide
port:
The console port is located on the back of the gateway.
Use only the DB-9 port labeled Console; the serial port AUX is an
auxiliary modem port.
If you connect the console port to a data-communications equipment
device, use a straight-through cable.
For cable pin assignments for the console connection, see
page 28.
terminal-emulation program.
described in
"Connecting the Console Port"
Continue to
"Connecting Power and Turning the Power On"
Performing the Initial Hardware Configuration
on page 26.
Figure 2
provides pin
Figure 2
on
on page 29.
27
Advertisement
Table of Contents
