Panasonic KX-TVA594 Installation Manual page 183

3.
Click "OK".
4.
Click "OK" to close all lines and continue with initialization.
5.
Click "OK" when system initialization is complete.
Initializing the VPS with the Mode Switch
1.
Disconnect the port cables from the VPS.
2.
Turn the power switch off at the VPS.
3.
Set the Mode Switch to position 5 (see 2.3 Names and Locations).
1 2 3 4
0
1
4.
Turn the power switch back on at the VPS.
5.
Connect the port cables.
6.
Confirm that the Run Indicator blinks 5 times.
7.
Turn the power switch off at the VPS.
7.1 Initializing the VPS
Installation Manual 183