HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual page 43

2. Insert at least one screw through the rail-mounting bracket and into the cage nuts
installed earlier, securing the adjustable fixed rails to the rear of the rack.
NOTE: After installing your components, insert at least one more screw into each
adjustable rail for additional support.
Figure 4-5: Securing the adjustable fixed rail to the rear
of the rack
3. Retighten the wing nuts on the adjustable rails.
The adjustable fixed rails are now ready for installation of your components.
HP 10000 Series Rack Reference Guide
Installing Components
4-9