Horizontal Crate; Vertical Crate For Rack Options - HP 245161-B22 - 10642 42U Rack Shock Pallet Best Practices Manual

NOTE
Each of the packing and unpacking procedures takes less than one-half
hour and requires at least two people to complete.
NOTE
The 10000 and 10000 G2 Series Racks use different shock pallets. If a
rear extension is installed on the 10000 G2 Series Rack, a specific shock
pallet is required to accommodate the dimensions of the rack and attached
rear extension. The 10000 Series Rack with extension is not supported in
the CTO shipping environment.
An HP shock pallet spares kit is recommended and can be obtained when moving a data center or
relocating pre-configured racks. Contact your local HP reseller for information on spares kits.
NOTE
The 10000 Series Rack Model 10647 is not available on a shock pallet
due to safety and stability concerns.
NOTE
All wood components of these pallets have been properly treated to comply
with the pest-free certifications required by foreign countries.

Horizontal crate

10000 and 10000 G2 Series Racks ship in an enclosed horizontal crate. The enclosed horizontal
crate provides greater protection for the empty rack during airfreight transport and other rugged
transportation modes.
NOTE
Horizontally crated racks do NOT support configured racks.
NOTE
The 10000 Series Rack Models S10614 and 10842 are not available for
shipment in a horizontally crate.

Vertical crate for rack options

If specially ordered, 10000 G2 Series 42U and 36U racks can be shipped in a vertical crate. The
rack must include factory installed option in the customer order to qualify for shipment in the vertical
crate. The rack ships on a CTO shock pallet and is enclosed in a wooden crate. The vertical crate
provides greater protection for the configured rack during airfreight transport and other rugged
transportation modes.
NOTE
All wood components of these pallets have been properly treated to comply
with the pest-free certifications required by foreign countries.
25