Before You Call For Service - Kenmore 9910 - 126 Can Beverage Center Owner's Manual

Before You Call For Service
Problem
Possible Cause What to do
No Power. A fuse in your home may
be blown or the circuit
breaker tripped,
Replace fuse or reset circuitbreaker,
Power surge,
Unplug the beverage centre, wait a
few seconds and then plug it back in,
Plug not fully inserted lnto Make sure the 3-prong plug on the
wall outlet beverage centre ts fulIy inserted Into
outlet,
Cabinet Temperature
too High
Temperature setting
Verify the temperaturecontrol setltng_
Adjust if neccessary,
Door(s) not shut properly
or opened excessively
Ensure that the doors are fully closed
and that the gaskets are sealing
against the cabinets Open the doors
only as needed and for short periods
of time
Recentlyadded a large
quantity of warm bottles
to the cabinet
Umit the quantity of warm botlles
being Introduced to the cabinet at the
same tlme_ Attempt to phase in the
load introductionif possible°
"Clicking" Noise
Condensation on the
cabinet andlor doors
Normal sound
High humidity conditions
In the home
No user interventionis required as
thissound is normal during the opera.
lion of the appliance. Th_saudible
'clicking' noise may be heard as the
appliance ends or begins a cooling
cycle,
The condensationwill subside once
humldtty conditions return to normal
Door(s) not shut properly
or opened excessively
Ensure that the door Is fully closed
and that the gasket is sealing against
the cabinet Open the door only as
needed and for short periods of time.
tf none of the above rectifies the situation, please contact our customer care depart-
ment at 1-800-4MY-HOME (1-800-469-4663)
10