Pioneer TS-A1072R - Car Speaker - 20 Watt Installation Manual page 11

In order to output the image (RGB image) from RCA Video output (yellow)
when performing navigation, switching the image output is required.
1. Park your car in a safe place, and pull the side brake.
2. Turn the power of the main unit off (cut off the engine).
3. While pressing
numeric keypad of the Remote Controller, turn the ACC on
(start the engine). Keep pressing the
the image is displayed on the screen.
Image output is switched, as the image of the navigation (RGB image) is output
from RCA Video output, and the image is displayed on the screen.
Voice Guidance
Speaker with infrared
sensor < ex.CD-TS36 >
(Sold Separately)
(AUDIO) button on the bottom left of the
To Audio input
(AUDIO) button until
To Video input
Display with RCA
input jacks
10