Chapter 3
Configuring the Cisco ATA for H.323
Basic Configuration Steps in a Non-TFTP Server Environment
Table 3-4
Table 3-4
Basic Steps to Configure the Cisco ATA Without Using the TFTP Server Method
Action
Download the desired Cisco ATA release software zip file from the Cisco web site:
1.
a.
If you are a registered CCO user. go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
b.
Download the zip file that contains the software for the applicable release and signaling
image you are using. The contents of each file are described next to the file name.
Extract the files to the desired location on your PC.
c.
Note
The file that contains the protocol signaling image has an extension of .zup.
Manually upgrade the Cisco ATA to the correct signaling image.
2.
Configure the Cisco ATA by using either one of the manual-configuration methods.
3.
Power up the Cisco ATA.
4.
OL-4804-01
shows the basic steps for configuring the Cisco ATA without using the TFTP server method.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
Steps Needed to Configure the Cisco ATA
Reference
Upgrading the Signaling
Image Manually, page 8-2
Voice Configuration
•
Menu, page 3-20
Cisco ATA Web
•
Configuration Page,
page 3-23
3-7