connection is still established without any user action but the repeated attempts
will not run the battery down.
Time synchronization
In the top right corner of the screen you have another button that leads to a new
screen where you can synchronize the clock of your PDA to the very accurate time
provided by the connected GPS.
Turn on the Auto Correction switch to let HP iPAQ Trip Guide frequently check and
correct the internal clock of the device with the GPS time.
Below that button you will see the current values of the GPS and the device clocks. You
can check here whether any correction is needed. Tap the
synchronize the time.
Below the PDA time you have hour and minute controls to manually correct the time
with or without a valid GPS time. It also gives you the chance to correct the time after
synchronization if your PDA does not support time zones or daylight saving time.
Screens with map
Having explained the contents of the map, the description of the other parts of the
map screens follows. There are two map screens: the Map screen and the Cockpit
screen. The way they show the map is the same but their look and controls are
optimised for different purposes.
38
button to manually