Field Service; General Safety - Motorola 8900 - Blackberry Curve Cell Phone OEM Car Charger Developer's Manual

Field Service

Field Service
For Field Service requests, use this email address:
n2csfs01@motorola.com

General Safety

Remember!. . . safety depends on you!
The following general safety precautions must be observed during all phases of operation,
service, and repair of the equipment described in this manual. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety standards of
design, manufacture, and intended use of the equipment. Motorola, Inc. assumes no liability for
the customer's failure to comply with these requirements. The safety precautions listed below
represent warnings of certain dangers of which we are aware. You, as the user of this product,
should follow these warnings and all other safety precautions necessary for the safe operation of
the equipment in your operating environment.
Ground the instrument
Only suitably qualified individuals should work on the product and host system. Consideration
should be given to the safest grounding arrangement for the host application.
Do not operate in an explosive atmosphere
Do not operate the equipment in the presence of flammable gases or fumes. Operation of any
electrical equipment in such an environment constitutes a definite safety hazard.
Do not service or adjust alone
Do not attempt internal service or adjustment unless another person, capable of rendering first aid
is present. There are no user serviceable parts inside the C24 module.
Keep away from live circuits
Operating personnel must:
not remove equipment covers. Only Factory Authorized Service Personnel or other qualified
•
maintenance personnel may remove equipment covers for internal subassembly, or
component replacement, or any internal adjustment
not replace components with power cable connected. Under certain conditions, dangerous
•
voltages may exist even with the power cable removed
always disconnect power and discharge circuits before touching them
•
xii C24 Module Hardware Description December 15, 2008