Table of Contents
Advertisement
HECK THE MOUSE CABLE
C
—
• Check the cable connector for bent or broken pins and for damaged or frayed cables. Straighten bent
pins.
• Ensure that the cable is firmly connected to the computer.
EST THE MOUSE
— Connect a properly working mouse to the computer, and try using the mouse. If the
T
new mouse works, the original mouse was faulty.
HECK THE MOUSE SETTINGS
C
Click the Start button, click Control Panel, and then click Printers and Other Hardware.
1
Click Mouse.
2
Try adjusting the settings.
3
EINSTALL THE MOUSE DRIVER
R
HECK FOR INTERRUPT REQUEST CONFLICTS
C
Network Problems
HECK THE NETWORK CABLE CONNECTOR
C
diagram (see page 14).
HECK THE NETWORK LIGHTS ON THE BACK OF THE COMPUTER
C
communication exists. Replace the network cable.
network
integrity/speed light
ESTART THE COMPUTER AND TRY TO LOG ON TO THE NETWORK AGAIN
R
—
— See page 55.
— See page 59.
— Ensure that the network cable is connected as shown on the setup
— No light indicates that no network
activity light
41
Solving Problems
Advertisement
Table of Contents
