Registering A Previous Location In The Address Book; Editing A Location's Information - Pioneer AVIC-N3 Operation Manual

Registering a previous location
in the Address Book
Once a destination or way point is searched, it is
automatically retained and stored in the
Destination History. If a search is canceled
while still in progress, only the places where the
map was displayed and scrolled through or
places where the short-cut menu was displayed
are retained and stored. Note that after 100
places are stored, new places are automatically
overwritten on top of old ones, in order from old-
est to most recent. Therefore, to ensure that cer-
tain places are kept and not overwritten, be sure
to register them in the Address Book.
1
Touch "Destination" in the Main menu,
then touch "Destination History".
2
Touch on the right-hand side of the
place you want to register in the Address
Book.
:
That place can be registered or deleted.
:
The map of that place can be displayed.
➲ Searching the destination by map ➞
Page 35
3
Touch "Registration".
4
Touch "Save".
Registration is now complete.
❒ If you want to stop registration, touch
"Back".
➲ "Editing a location's information" ➞
Page 50
➲ in the Shortcut menu ➞ Page 30
50

Editing a location's information

In the Address Book menu, touching the
the right-hand side of the place displays the
Address Book Operate menu.
To edit the information about the location:
1
Touch "Destination" in the Main menu,
then touch "Address Book".
2
Touch on the right-hand side of the
place whose information you want to edit.
:
The information related to that place can be
edited.
:
The map of that place can be displayed.
➲ Searching the destination by map ➞
Page 35
Add:
The screen for selecting the method for regis-
tering the location in the Address Book
appears.
➲ Address Search ➞ Page 22
➲ Searching places to register ➞ Page 37 to
40
❒ If you select the "Map Search", move the
scroll cursor to the place you want to set
and touch "OK".
:
Displayed on the left-hand side of places that
can be searched by voice command.
3
Touch "Edit Information".
on