Setting the security (continued)
Control device setup
Control from the remote control and main unit
controls can be restricted.
Press ▲▼ to select "CONTROL
1.
DEVICE SETUP".
DISPLAY SETTING
TEXT CHANGE
CONTROL DEVICE SETUP
2.
Press ENTER.
•
The "CONTROL DEVICE SETUP" screen will be
displayed.
CONTROL DEVICE SETUP
CONTROL PANEL
REMOTE CONTROLLER
Press ▲▼ to select "CONTROL
3.
PANEL" or "REMOTE
CONTROLLER".
•
CONTROL PANEL:
Restriction of control from the main unit
controls can be set.
•
ENABLE:
Enables control from the main unit controls.
•
DISABLE:
Disables control from the main unit controls.
•
REMOTE CONTROLLER:
Restriction of control from the remote control
can be set.
•
ENABLE:
Enables control from the remote control.
•
DISABLE:
Disables control from the remote control.
4.
Press ENTER.
•
The "CONTROL PANEL" or "REMOTE
CONTROLLER" screen will be displayed.
CONTROL PANEL
C ENABLE
DISABLE
Press ▲▼ to select "ENABLE"
5.
or "DISABLE", and then press
ENTER.
•
A confirmation screen will appear.
SURE?
EXECUTE
CHANGE
EXECUTE
ENTER
Press ◄► to select "EXECUTE",
6.
and then press ENTER.
90 – ENGLISH
OFF
CANCEL
Note
•
If a setting is reflected, the on-screen menu
disappears. To continue operation, press the MENU
button to display the main menu.
•
If an attempt is made to control the projector from
the remote control or main unit controls when
"ENABLE" is set, the security password screen
appears. To change a setting, enter the security
password and change the operation setting. The
security password screen disappears if the MENU
button is pressed or no operation is performed for
10 seconds.