Recording in standby mode
Media Center can take the HP Digital Entertainment
Center out of standby mode just before a scheduled show
begins recording. The HP Digital Entertainment Center
returns to standby mode when the recording is complete.
Remote control LED and the remote sensor LED
Under the Standby button is an LED that blinks when the
remote control is sending a signal to the remote sensor.
The remote sensor displays a red LED when you press a
button on the remote control (select models only). Some
kinds of lighting may cause the remote sensor to blink
without you pressing the remote control.
Media Center begins recording with the monitor and
sound turned on unless you manually turn them off before
the scheduled recording.
Media Center cannot record TV programs if the computer
is turned off.
w
If you turn off (shut down) your HP Digital
Entertainment Center, Media Center will not
record a scheduled TV program. The HP
Digital Entertainment Center must be turned
on or in standby mode to record TV
programs.
Using the Remote Control
25