Using The Configuration Utility - D-Link AirPlus DWL-650+ Quick Installation Manual

If the utility icon does not appear, double-
click the
on your desktop.

Using the Configuration Utility

The D-Link AirPlus Configuration Utility
you to the Link Info section.
A. Status: Displays the
MAC Address of the
Access Point that
is associated with the
DWL-650+.
A
B
C
D
E
F
D. Channel: Displays
the channel information.
By default, the channel is
set to 6 and selection is
automatically determined
by the DWL-650+.
shortcut icon that has appeared
window will appear. By default, it will take
:
B. SSID The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
650+ wireless connection to the access
point. The Signal Strength represents the
wireless signal between the access point
and the DWL-650+. The percentage
coincides with the graphical bar.
DWL-650+
C. TxRate:
The default
setting is 11 Mbps; however,
TxRate settings are auto-
matically determined by the
DWL-650+ depending on the
distance from the access point.
F. Data Rate:
Graphically
displays the
statistics of data
transmitted and
received.