Call Function - D-Link DPH-128MS User Manual

Section  - Installation
Do Not Disturb: Enable or disable Do Not Disturb to reject all incoming
calls.
Call Waiting:
Enable or disable Call Waiting to accept the incoming
call when the phone is engaged in an active call.
Call Waiting Tone Notify:
Enable or disable to generate a reminding tone to inform
the user, who is on a phone call, of a new incoming
call.
Anonymous Call:
Select one from the options if you want to hide your
identification when you make outgoing calls. If the
Display Name is selected, only the display name in SIP
URI will be replaced by Anonymous; if the Full URI is
selected, it will hide all the personal information.
Anonymous Call Reject:
Enable or disable this function to automatically reject the
incoming calls without call identification.
Call Forward:
Select one rule from the options for call forwarding and enter the number where the call will be forwarded.
No Answer: It forwards calls if the call is not picked up when the time elapsed (Incoming No Answer Timer).
Busy: It forwards calls if the phone is in use.
Unconditional: It always forward incoming calls to the destination.
Hot Line:
Enable the function to originate call to the Number automatically whenever you pick up the handset. If the Timeout
is zero, it means the number will be dialed immediately; otherwise, the phone waits for the time elapsed and then
dials the number by itself.
Click Submit to save and activate the changes, or Reset to restore the configurations.
D-Link DPH-18MS User Manual

Call Function

0