76
Chapter 6—Input Channels
Naming Input Channels
By default, Input Channels are named CH1, CH2, etc. You can change these names if nec-
essary. For example, it may be helpful for mixdown if you name a particular Input Channel
with the type of musical instrument connected to the corresponding input jack.
1 Press the DISPLAY ACCESS [INPUT PATCH] button repeatedly until the In
Patch | CH Name page appears.
You can specify Short names in the center column (
column (
2 Move the cursor to a name you wish to change, then press [ENTER].
The Title Edit window appears, enabling you to enter a name.
3 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Input Patch library.
DM1000—Owner's Manual
2
).
1
2
1
) and Long (full) names in the right