Administration Settings; Administrative Access - D-Link DFL-700 Manual
Network security firewall
Hide thumbs
Also See for DFL-700:
- Product manual (138 pages) ,
- Manual (85 pages) ,
- Quick installation manual (14 pages)
Table of Contents
Advertisement
Administration Settings
Administrative Access
Ping – If enabled, specifies who can ping the interface IP of the DFL-700. Default if
enabled is to allow anyone to ping the interface IP.
Admin – If enabled allows all users with admin access to connect to the DFL-700 and
change configuration, can be HTTPS or HTTP and HTTPS.
Read-Only – If enabled allows all users with read-only access to connect to the DFL-700
and look at the configuration, can be HTTPS or HTTP and HTTPS. If there is no Admin
access specified on an interface and only read-only, admin users can still connect but will be
in read-only mode.
SNMP – Specifies if SNMP should be allowed or not on the interface, the DFL-700 only
supports read-only access.
12
Advertisement
Table of Contents
