Hitachi ADVANCED COLOR PC-ARFG2-E1 Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Controller
  5. ADVANCED COLOR PC-ARFG2-E1
  6. Installation & operation manual
Hitachi ADVANCED COLOR PC-ARFG2-E1 Installation & Operation Manual

Hitachi ADVANCED COLOR PC-ARFG2-E1 Installation & Operation Manual

Wired remote controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
–
INSTALLATION &
OPERATION
MANUAL
–
ADVANCED COLOR
WIRED REMOTE CONTROLLER
MODELS
PC-ARFG2-E1
EN
INSTALLATION AND OPERATION MANUAL
ES
MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO
DE
INSTALLATIONS- UND BETRIEBSHANDBUCH
FR
MANUEL D'INSTALLATION ET DE FONCTIONNEMENT
IT
MANUALE DI INSTALLAZIONE E D'USO
PT
MANUAL DE INSTALAÇÃO E FUNCIONAMENTO
DA
MONTERINGS- OG DRIFTSVEJLEDNING
NL
INSTALLATIE- EN BEDIENINGSHANDLEIDING
SV
INSTALLATION- OCH DRIFTHANDBOK
EL
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ ΚΑΙ ΛΕΙΤΟΥΡΓΙΑΣ
PMEN0601 rev.0 - 07/2022
BG
РЪКОВОДСТВО ЗА ИНСТАЛИРАНЕ И ЕКСПЛОАТАЦИЯ
CS
NÁVOD K MONTÁŽI A OBSLUZE
HU
TELEPÍTÉSI ÉS ÜZEMELTETÉSI ÚTMUTATÓ
PL
INSTRUKCJA MONTAŻU I OBSŁUGI
RO
MANUAL DE INSTALARE SI OPERARE
RU
ИНСТРУКЦИЯ ПО МОНТАЖУ И ЭКСПЛУАТАЦИИ
FI
ASENNUS- JA KÄYTTÖOPPAASTAР
HR
PRIRUČNIKU ZA INSTALACIJU I UPOTREBU
SL
NAVODILA ZA MONTAŽO IN DELOVANJE
SK
NÁVOD NA PREVÁDZKU A INŠTALÁCIU
UK
ПОСІБНИКА З МОНТАЖУ ТА ЕКСПЛУАТАЦІЇ

Advertisement

Table of Contents
loading

Related Manuals for Hitachi ADVANCED COLOR PC-ARFG2-E1

Summary of Contents for Hitachi ADVANCED COLOR PC-ARFG2-E1

  • Page 1 – INSTALLATION & OPERATION MANUAL – ADVANCED COLOR WIRED REMOTE CONTROLLER MODELS PC-ARFG2-E1 INSTALLATION AND OPERATION MANUAL РЪКОВОДСТВО ЗА ИНСТАЛИРАНЕ И ЕКСПЛОАТАЦИЯ MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO NÁVOD K MONTÁŽI A OBSLUZE INSTALLATIONS- UND BETRIEBSHANDBUCH TELEPÍTÉSI ÉS ÜZEMELTETÉSI ÚTMUTATÓ MANUEL D’INSTALLATION ET DE FONCTIONNEMENT INSTRUKCJA MONTAŻU I OBSŁUGI MANUALE DI INSTALLAZIONE E D’USO MANUAL DE INSTALARE SI OPERARE...
  • Page 2 Specifikationerna i den här handboken kan ändras utan föregående meddelande för att Hitachi ska kunna leverera de senaste innovationerna till kunderna. Vi på Hitachi gör allt vi kan för att se till att alla specifikationer stämmer, men vi har ingen kontroll över tryckfel och kan därför inte hållas ansvariga för den typen av fel.
  • Page 3 Specifikacije u ovom priručniku podložne su izmjenama bez najave da bi tvrtka Hitachi mogla svojim klijentima pružiti najnovije inovacije. Iako se ulaže sav trud da bi se osigurala točnost svih specifikacija, greške u tisku nisu pod kontrolom tvrtke Hitachi; tvrtka Hitachi ne može biti odgovorna za takve greške.
  • Page 4 C A U T I O N This product shall not be mixed with general house waste at the end of its life and it shall be retired according to the appropriated local or national regulations in a environmentally correct way. Due to the refrigerant, oil and other components contained in Air Conditioner, its dismantling must be done by a professional installer according to the applicable regulations.
  • Page 5 В Н И М А Н И Е В края на своя технологичен живот този продукт не бива да се изхвърля заедно с общите битови отпадъци и трябва да се третира съгласно приетите местни или национални подзаконови нормативни актове по правилен от гледна точка на опазване на...
  • Page 6 DANGER – Hazards or unsafe practices which COULD result in severe personal injuries or death. PELIGRO – Riesgos o prácticas poco seguras que PODRÍAN producir lesiones personales e incluso la muerte. GEFAHR – Gefährliche oder unsichere Anwendung, die zu schweren Körperverletzungen oder zum Tod führen kann. DANGER –...
  • Page 7 ПРЕДУПРЕЖДЕНИЕ – Опасные или рискованные действия, которые МОГУТ привести к легким травмам или повреждению имущества. HUOMIO – Vaaralliset tai riskialttiit toimenpiteet, jotka SAATTAVAT aiheuttaa vähäisiä henkilövammoja tai tuotteen tai omaisuuden vahingoittumisen. OPREZ – Rizični ili nesigurni postupci koji MOGU uzrokovati lakše tjelesne ozljede ili oštećenje proizvoda ili vlasništva. POZOR - Nevarnosti in nevarna ravnanja LAHKO povzročijo manjše telesne poškodbe ali poškodbe izdelka ali materialno škodo.
  • Page 8 English Original Version English Original Version Español Versión traducida Čeština Přeložená verze Deutsch Übersetzte Version Magyar Lefordított változat Français Version traduite Polski Tłumaczenie wersji oryginalnej Italiano Versione tradotta Română Versiune tradusă Português Versão traduzidal Русский Переведенная версия Dansk Oversat version Suomi Käännetty versio Nederlands...

  • Page 9: Table Of Contents

    GENERAL INDEX General index 1 Safety summary ......................... 1 2 Switch Names and Functions ....................2 3 Operation ............................ 3 Operation Start/stop ............................. 3 Basic Operation ..............................3 Operation Mode..............................5 Temperature Setting ............................. 5 Fan Speed ................................6 LOUVER swing Direction ............................. 6 4 Icon Description.........................
  • Page 10 GENERAL INDEX 5.8.5 FloorSense cool air flow ............................... 22 Motion sensor setting ............................23 5.9.1 Motion sensor selection ..............................23 5.9.2 Absent setting selection ..............................24 5.9.3 Check interval time setting ............................24 5.10 Setback Setting ..............................25 5.10.1 Setback schedule setting ............................25 5.10.2 Setback manual setting ..............................
  • Page 11 GENERAL INDEX 6.1.14 Cancel Preheating Control ............................67 6.1.15 Elevating grille Setting ..............................68 6.1.16 Power Up Setting ............................... 69 6.1.17 Setback Trigger Unit ..............................69 6.1.18 Refrigerant Leak Sensor Setting ..........................70 Service menu ..............................73 6.2.1 Operation Lock/Unlock Setting ............................. 73 6.2.2 Password Setting .................................
  • Page 12 GENERAL INDEX 10 In Alarm Condition ....................... 101 10.1 Power Failure ..............................101 10.2 Electromagnetic Interference (EMI)........................101 PMML0601 rev.0 - 07/2022...

  • Page 13: Safety Summary

    In case that the controller is installed in a place where there is electromagnetic wave radiation, If you have any questions, contact your Hitachi distributor or dealer. shield the controller and cables by covering with the steel box and running the cable through the metal conduit tube.

  • Page 14: Switch Names And Functions

    • the CD-ROM is missing or it is not readable, please contact your Hitachi dealer or distributor. The backlight turns off 15 seconds after the last operation. If you press any switch, the backlight is turned on. (The switch pressed to turn on the •...

  • Page 15: Operation

    OPERATION 3 OPERATION 3.1 OPERATION START/STOP ” (run/stop). The run indicator will be turned on/off and Press “ the operation will be started or stopped accordingly. N O T E • Once the temperature and air volume settings are entered on the wired controller, they are applied to the units.
  • Page 16 OPERATION Fan Speed Mode Menu Fan Speed 3 Air Conditioner ON Louver When air conditioner is on, press “ ” or “ ” to switch below items: “Temperature” ↔ “Mode” ↔ “Fan Speed” ↔ “Louver” ↔ “Menu”. Temperature Menu PMML0601 rev.0 - 07/2022...

  • Page 17: Operation Mode

    OPERATION 3.3 OPERATION MODE Heating mode is only available when the indoor unit supports cooling and heating. Cooling only machine cannot support heating. Operation mode setting 1 Press “ ” or “ ” to select “Mode”. 2 Set the operation mode with “ ”...

  • Page 18: Fan Speed

    OPERATION 3.5 FAN SPEED 1 Press “ ” or “ to select “Fan Speed”. ”, the fan speed changes as follows. 2 By pressing “ ” or “ N O T E During dry operation, the fan speed is automatically changed to •...

  • Page 19: Icon Description

    ICON DESCRIPTION 4 ICON DESCRIPTION The status of the remote controller is displayed on the operation screen. N O T E It may not be displayed depending on the type of outdoor unit or indoor unit you are using. • If there are multiple status, the high priority icon is displayed first.
  • Page 20 ICON DESCRIPTION Icon Description Power savings Power savings: Low Either the outdoor capacity control, indoor rotation control, or intermittent operation control is set. Power Savings: Med Power savings: High Outdoor capacity control is set on the central controller or outdoor unit. External saving It does not light when the indoor rotation control or intermittent operation control of the remote controller is set.

  • Page 21: Function Menu

    FUNCTION MENU 5 FUNCTION MENU N O T E Some functions cannot be set depending on the type, configuration, • and usage status of the indoor unit. If a function with " " is displayed, it means the function is not •...

  • Page 22: Operation Schedule Setting

    FUNCTION MENU 3 Press “ ” or “ ” to set each setting data for the selected • When “ON Time” or “OFF Time” is selected, the setting time items. can be adjusted in 30-minute increments by pressing “ ” or After setting, press “...

  • Page 23: Schedule Day And Time Setting

    FUNCTION MENU 5.2.1 Schedule Day and Time Setting N O T E 4 Press” ” or “ ” to select schedule timer No.1 to No.5, and press “ ” or “ ” to select “ON Time” ↔ “OFF Time” ↔ Scheduled operation (stop) is not possible when the remote control •...

  • Page 24: Schedule Turn On/Off Setting

    FUNCTION MENU 5.2.2 Schedule Turn ON/OFF Setting 5.2.3 Schedule Holiday Setting 1 Select “Operation Schedule” on the “Function Menu” screen N O T E and press “OK”. For holiday setting, the schedule setting indicator turns off. • If the current time is not set, the “Adjusting Date/Time” setting screen is displayed.

  • Page 25: Reset The Setting

    FUNCTION MENU 5.2.4 Reset the setting 3 Select "Yes" by pressing “ ” or “ ”and then press "OK". 1 Select “Operation Schedule” on the “Function Menu” screen and press “OK”. All schedule and holiday settings are reset and the screen “5.2.1 Schedule Day and Time returns to the Step 3 of •...

  • Page 26: Power Savings Mode Setting

    FUNCTION MENU 5.3.1 Power Savings Mode Setting 5.3.2 Power Savings ON/OFF Setting 1 Select “Power Savings Setting” on the “Function Menu” 1 Select “Power Savings Setting” on the “Function Menu” screen and press “OK”. screen and press “OK”. 2 Press “ ” or “ ” to select the “ON/OFF”and press “OK”. 2 Press “...

  • Page 27: Power Savings Level Setting

    FUNCTION MENU 3 Press “ ” or “ ”, the power savings level changes as follows: 5.3.3 Power Savings Level Setting “LOW” ↔ “MED” ↔ “HIGH”. 1 Select “Power Savings Setting” on the “Function Menu” Select the level and press “OK”. screen and press “OK”.

  • Page 28: Power Saving/Night Quiet Schedule Setting

    FUNCTION MENU 2 Press “ ” or “ ”, the level changes as follows: “Not Set” ↔ “LOW” ↔ “MED” ↔ “HIGH”. Select the level and press “OK”. Press “ ”, the screen returns to the “Function Menu” screen. 5.5 POWER SAVING/NIGHT QUIET SCHEDULE SETTING This function starts and stops power savings control and Example of power saving operation and schedule operation noise reduction control at the desired time.

  • Page 29: Schedule Day And Time Setting

    FUNCTION MENU 5.5.1 Schedule Day and Time Setting 4 Select the day of the week (from Mon. to Sun.) to be set with N O T E “ ” or “ ”, and press “OK”. “7.1 Adjusting indicates that schedule control is not possible. Refer to •...

  • Page 30: Schedule Turn On/Off Setting

    FUNCTION MENU 5.5.2 Schedule Turn ON/OFF Setting 1 Select “Power Saving/Night Quiet Schedule” on the 3 Press “ ” or “ ” to select “Turn ON/OFF Schedule, and then “Function Menu” screen and press “OK”. press “OK”. When the schedule is ON, "Turn OFF Schedule" confirmation •...

  • Page 31: Power Consumption Display

    FUNCTION MENU 5.6 POWER CONSUMPTION DISPLAY This function displays the power consumption of the outdoor unit 3 Press “ ” or “ ” to select the display period, and then press compressor. “OK”. It switches in the order of 1 day (24 hours) ↔ 1 week The value of each displayed in Graph/List format is 1 day (7 days) ↔...

  • Page 32: Autoboost (Quick Mode) Setting

    FUNCTION MENU 5.7 AUTOBOOST (QUICK MODE) SETTING 2 Press “ ” or “ ” the selected items changes as follows: AUTOBOOST is the commercial name of the “Quick mode” function. “Not Set” ↔ “COOL” ↔ “HEAT” ↔ “Cool + Heat”. This function increases the cooling or the heating capacity for Select the Autoboost mode and press “OK”...

  • Page 33: Comfort Setting

    FUNCTION MENU 5.8 COMFORT SETTING 1 In order to access the Comfort settings menu, select N O T E “Comfort Setting” on the “Function Menu” screen and press This function cannot be set when the indoor unit does not support •...

  • Page 34: Radiant Sensor Control For Heating

    FUNCTION MENU 5.8.3 Radiant sensor control for heating The radiant sensor detects the radiation temperature of humans or objects by measuring the level of infrared light they emit. 1 Once in the Comfort setting menu, press “ ” or “ ” to select “Radiant Sensor Control for Heating”, and then press “OK”.

  • Page 35: Motion Sensor Setting

    FUNCTION MENU 5.9 MOTION SENSOR SETTING 5.9.1 Motion sensor selection This function and its settings are available only for indoor units equipped with a motion sensor. The motion sensor can 1 Select “Motion Sensor Setting” on the “Function Menu” be integrated into the front panel of the unit or a separate screen and press “OK”.

  • Page 36: Absent Setting Selection

    FUNCTION MENU 5.9.2 Absent setting selection The “If absent” setting defines the operation mode of the indoor 3 Press “ ” or “ ”, the operation changes as follows: units when “Auto-Save” function enters in the “If absent” control “ON” ↔ “Standby” ↔ “OFF” ↔ “Stop - Detect”. sequence.

  • Page 37: Setback Setting

    FUNCTION MENU 5.10 SETBACK SETTING 5.10.1 Setback schedule setting 2 Press “ ” or “ ” to select the settings, and the selected item changes as follows: Setback function is designed to maintain a minimum level of "ON Time" ↔ "OFF Time" ↔ “ ”.

  • Page 38: Setback Manual Setting

    FUNCTION MENU 5.10.2 Setback manual setting 2 Press “ ” or “ ” to select “ON”. Press “OK” and the screen returns to the “Function Menu” screen. This function is used to temporarily activate Setback operation. turns on when schedule operation is ON. •...

  • Page 39: Filter Reminder Reset Setting

    FUNCTION MENU 3 Press " " to lower the grille until it's lowered to the set 4 After cleaning the air filter, install the air filter and press " " to raise the grille. Once the grille is stored inside the unit, it will distance.

  • Page 40: Frostwash

    FUNCTION MENU 5.13 FROSTWASH FrostWash is available when applicable outdoor units and 5.13.2 Start FrostWash indoor units are connected. To use this function in VRF system, Generate frost on the coil and then melt the frost to wash the outdoor unit function selection item “F1” need to be configured coil.

  • Page 41: Frostwash Setting On Outdoor Unit

    FUNCTION MENU 5.13.3 FrostWash setting on outdoor unit To use this function in the VRF system, function selection F1 This function suppresses a clog on the heat exchanger. needs to be configured on the outdoor units. FrostWash setting First, freeze the indoor unit heat exchanger when whole system is disabled on the factory default setting.

  • Page 42: Frostwash Setting

    FUNCTION MENU  5.13.5 FrostWash Setting Manual FrostWash 1 In order to access FrostWash settings, select “FrostWash N O T E Setting” in Function Menu, and press “OK”. disappears when performing Manual FrostWash or when • The icon enabling the Auto-FrostWash. Manual FrostWash may not be performed when the unit is used •...
  • Page 43 FUNCTION MENU   Auto-FrostWash FrostWash Intervals 1 Press “ " or " " to select "Set FrostWash Intervals" and N O T E press "OK". disappears when performing Manual FrostWash or when The icon enabling Auto FrostWash. This function automatically starts FrostWash when the indoor unit operation is stopped and the set time interval has elapsed.
  • Page 44 FUNCTION MENU   Auto-FrostWash Schedule FrostWash Operation History 1 Press “ " or " " to select "Auto-FrostWash Schedule" and N O T E press "OK". If the current time is not set, the date will be "- -". •...

  • Page 45: Display During Frostwash

    FUNCTION MENU 5.13.6 Display during FrostWash During FrostWash operation, the following screens If the indoor or outdoor temperature does not meet the conditions for FrostWash, the following is sequences are displayed: displayed. - 1 When the indoor unit is out of the temperature ...

  • Page 46: Individual Louver Setting

    FUNCTION MENU 5.14 INDIVIDUAL LOUVER SETTING This function is to individually set the air direction of multiple air 3 Press” ”, “ ”, “ ”, or “ ” to select the indoor unit to change outlets. the louver direction, and press “OK”. N O T E N O T E This function is available when the indoor unit supports individual...

  • Page 47: Cancel Individual Louver Setting

    FUNCTION MENU 5.15 CANCEL INDIVIDUAL LOUVER SETTING 1 Select “Individual Louver Setting” on the “Function Menu” 3 Press” ”, “ ”, “ ”, or “ ” to select the indoor unit to cancel the and press “OK”. louver direction, and press “OK”. N O T E The indoor unit displayed on the screen flashes if an individual louver is set.

  • Page 48: Ventilation

    FUNCTION MENU 5.17 VENTILATION 2 Press “ " or " " to select the operation mode and press Operation Mode Action “OK” to confirm. The item changes as follows: “A/C” ↔ Operate the air conditioner individually. “Ventilation” ↔ “A/C + Ventilation”. Press "...

  • Page 49: Night Purge

    FUNCTION MENU 2 Press “ " or " " to select "Venti. Mode" and press "OK". 2 Press “ " or " " to select "Night Purge" and press "OK". 3 Press “ " or " " to select the operation mode and press “OK” 3 Press “...

  • Page 50: Service & Installation Menu

    SERVICE & INSTALLATION MENU 6 SERVICE & INSTALLATION MENU 4 Input password by pressing “ ”, “ ”, “ ”, or “ ”, select “ 1 While the air conditioner is OFF, press “ ” to select “Menu” ”. and press “OK”. Then press “OK”.

  • Page 51: Installation Menu

    SERVICE & INSTALLATION MENU 6.1 INSTALLATION MENU 6.1.1 Test Run 5 Cancel “Test Run” Mode When the unit is not in operation, press “ ”. 1 Select “Installation Menu” and press “OK”. When the unit is in operation, press “ ” (On/Off). 6.1.2 Function selection Function Selection is set from Installation Menu.
  • Page 52 SERVICE & INSTALLATION MENU 8 Select “Yes” and press”OK” to confirm the setting and return 4 Press “ ”, “ ”, “ ”, or “ ” to select the indoor unit to be set to Step 2. and press “OK”. This screen is not displayed when only one indoor unit is Select “No”...
  • Page 53 SERVICE & INSTALLATION MENU  Table A. Optional Setting Items for Function Selection Individual Element Optional function Settings Setting conditions Description setting Normal (factory setting) This function is used to adjust (Setting Temperature + 4°C) the temperature difference between the temperature read No compensation by the inlet sensor and the real Heating temperature...
  • Page 54 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting This function prevents the modification of the fan speed Function disabled (factory setting) Locking of fan speed setting of the unit from the remote (Not available for models controller and from central KPI-E4) controls, once it has been...
  • Page 55 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Function disabled (factory setting) Cancellation of forced This function is available compressor operation for at depending on the setting of Function enabled function b3. least 3 minutes (Compressor operation during 3 minutes is no longer forced) Sensor non enabled (factory setting)
  • Page 56 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Not used Use at 00 conditions – Only for DX-Interface, This function sets the unit to run Function disabled (factory setting) KPI-E4E and KPI-X4E: in high fan speed regardless the setting from remote control Function enabled High ventilation speed...
  • Page 57 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Normal control (factory setting) Fan control (Only for RPI- (4/6)FSRE) Special control for plenums This function prevents the Function disabled (factory setting) occurrence of an excessively cold air flow in heating mode Prevention of low air outlet by decreasing the fan speed temperature in heating mode...
  • Page 58 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Disabled (factory setting) KPI: Pre-cooling / pre-heating This function delays unit startup 30 minutes with energy recovery period 60 minutes Disabled (factory setting) This function selects the CO Econofresh: CO sensor gas sensor input for Econofresh.
  • Page 59 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Control in “Automatic” indoor fan speed mode (supporting High H) Function disabled This function limits the speed Models: of the indoor fan when room RCI-FSR temperature is close to the RCIM-FSRE setting temperature, allowing to RCD-FSR...
  • Page 60 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting 30 minutes (factory setting) 15 minutes This function sets the automatic Automatic reset time reset time delay for function F3. 60 minutes 90 minutes 19°C 20°C 21°C ·...
  • Page 61 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Function disabled 19°C is the standard minimum set point (factory setting) +1°C (Lower limit 20°C) +2°C (Lower limit 21°C) Lower limit of setting temperature for cooling This function defines the lowest +3°C (Lower limit 22°C) temperature setting value for (Minimum value of setting...
  • Page 62 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting When there is a remote control Start/Stop allowed (Factory setting) prohibition from a central control device, this function overrides Start/Stop not allowed this prohibition allowing the Override of Start/Stop operation of the Run/Stop D A N G E R prohibition at the remote...
  • Page 63 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting -0°C -0.5°C -1.0°C -1.5°C -2.0°C -2.5°C -3.0°C -3.5°C Calibration of remote Offset for the remote controller controller sensor sensor +0.5°C +1.0°C +1.5°C +2.0°C +2.5°C +3.0°C +3.5°C -0°C Not used Use at 00 conditions Not used...
  • Page 64 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Not used Use at 00 conditions Not used Use at 00 conditions Setting Position of Motion ○ Sensor Not used Use at 00 conditions Power save must be ON in Direct air blow Low (factory setting) order to use this function (L5 must be set to 01).
  • Page 65 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting This function is used to define Enabled (0.5°C steps) whether setting temperature is (factory setting) adjusted in 0.5°C steps (when set to “00”) or in 1°C steps (when set to “01”).
  • Page 66 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Not used Use at 00 conditions Not used Use at 00 conditions Not used Use at 00 conditions Disabled Operation modes in which Cooling setback operation is activated to Operation mode with setback keep a minimum comfort in the Heating...
  • Page 67 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting 0.5°C 1.0°C Setting of temperature 1.5°C This function can only be set differential for switching when function r1 is set to 01. 2.0°C cooling and heating 2.5°C 3.0°C Not used Not used...
  • Page 68 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Disabled 20.0°C 21.0°C 22.0°C If outdoor ambient temperature · · is higher than rC, there is no · · Maximum outdoor mode transition to heating · · temperature to allow in automatic cooling/heating operation mode switch to...
  • Page 69 SERVICE & INSTALLATION MENU Individual Element Optional function Settings Setting conditions Description setting Not used Use at 00 conditions Not used Use at 00 conditions Not used Use at 00 conditions Not used Use at 00 conditions Not used Use at 00 conditions Not used Use at 00 conditions N O T E...

  • Page 70: Thermistor Selection

    SERVICE & INSTALLATION MENU 6.1.3 Thermistor Selection This function is used to control the indoor temperature using 3 If “ ” or “ ” is pressed, the setting items are selected in the following order: “IDU” ↔ “Remote” ↔ “Average”. Select the remote controller sensor instead of Inlet Air Thermistor in the setting item and press “OK”...

  • Page 71: Input / Output Setting

    SERVICE & INSTALLATION MENU 6.1.4 Input / Output Setting 1 Select “Installation Menu” on the Service & Installation screen and press “OK”. Indoor unit number (Refrigerant system number - Indoor unit Address 2 Select “Input/Output” setting and press “OK”. 5 Press “ ” or “ ” to select the item. 6 Press “...
  • Page 72 SERVICE & INSTALLATION MENU  Input and Output Number Display and Connectors Input Number Display Factory Setting Port Setting Input/Output Indication Setting Item Indication Input 1 CN3 1-2 Remote ON/OFF 1 (Level) Input 2 CN3 2-3 Prohibiting Remote Control after Manual Stoppage Output 1 CN7 1-2 Operation...

  • Page 73: Thermistor Calibration In Controller

    SERVICE & INSTALLATION MENU 6.1.5 Thermistor Calibration in Controller 6.1.6 Fan Speed at Cooling Thermo-OFF This function is used to calibrate the temperature sensor This function is used to set the fan speed of the indoor unit at embedded into the wired remote controller Cooling Thermo-OFF.

  • Page 74: Fan Speed At Heating Thermo-Off

    SERVICE & INSTALLATION MENU 6.1.7 Fan Speed at Heating Thermo-OFF 6.1.8 Indoor Unit Address Change This function is used to set the fan speed of the indoor unit at This function is used to change the indoor unit address. Heating Thermo-OFF. N O T E 1 Select “Fan Speed at Heating Thermo-OFF”on the Refrigerant system “99”...

  • Page 75: Address Check Operation

    SERVICE & INSTALLATION MENU 6.1.9 Address Check Operation 6 Press “ ” and select “Yes”. The address change processing starts. The result is displayed after a few seconds. This function allows the user to check the addresses of indoor units when several units are controlled from the same wired remote controller.

  • Page 76: Address Initialization

    SERVICE & INSTALLATION MENU 6.1.10 Address Initialization This function can be used to initialize the indoor units addresses, 3 Select “Yes” and press “OK”. The address initialization cancelling the settings done with the “Indoor Unit Address processing starts. Change” function. Using this function, the indoor units addresses will be restored as the addresses set physically on the indoor units PCB by DSW setting.

  • Page 77: Setting Initialization

    SERVICE & INSTALLATION MENU 6.1.11 Setting Initialization This function is used to restore the factory default settings of 4 Select “Complete” and press “OK”. To initialize another Function Selection and Input/Output. setting of Function Selection and Input/Output, select “Continue” and press “OK” to return to Step2. N O T E The history display on the “Function Selection”...

  • Page 78: Main Remote Setting

    SERVICE & INSTALLATION MENU  6.1.12 Main Remote Setting Changing from the sub controller to the main controller If multiple remote control groups exist in the same outdoor 1 Select “Installation Menu” on the “Service & Installation” system, main/sub setting is automatically allocated. Set the screen by pressing “...

  • Page 79: Priority Setting

    • When using 2 remote controllers on the same indoor unit, it is not specialist or Hitachi Service team. possible to set priority This function cannot be used in case that any of the following devices •...

  • Page 80: Elevating Grille Setting

    SERVICE & INSTALLATION MENU 6.1.15 Elevating grille Setting In order to activate the elevating grille function for the related indoor units, some specific settings must be set for input/output “Table A. Optional Setting Items for Function contacts (refer to Selection” for details).

  • Page 81: Power Up Setting

    SERVICE & INSTALLATION MENU 3 Select “Yes” and press “OK” to confirm the configuration. 6.1.17 Setback Trigger Unit 4 When “Cancel” is selected, the screen returns to the The setback trigger unit can be set from the Installation Menu. “Elevating Grille Setting” menu. 1 Select the indoor unit by pressing “...

  • Page 82: Refrigerant Leak Sensor Setting

    SERVICE & INSTALLATION MENU  6.1.18 Refrigerant Leak Sensor Setting Test Run Function only available for those indoor units that are equipped 1 Select “Test Run” on the “Refrigerant Leak Sensor Setting” with refrigerant leak sensor. Current European indoor units menu and press “OK”.
  • Page 83 SERVICE & INSTALLATION MENU   Reset Leak Display Sensor ON Integration Time Reset 1 Select “Reset Sensor” on the “Refrigerant Leak Sensor 1 Select “Reset Sensor” on the “Refrigerant Leak Sensor Setting” menu and press “OK”. Setting” menu and press “OK”. 2 Select “Leak Display Reset”...
  • Page 84 SERVICE & INSTALLATION MENU Check 1 4 Press “OK” to get pass the information screen. 1 Select “Check 1” on the “Refrigerant Leak Sensor Setting” menu and press “OK”. 5 A list of items will be displayed with the corresponding item description and its value.

  • Page 85: Service Menu

    SERVICE & INSTALLATION MENU 6.2 SERVICE MENU 6.2.1 Operation Lock/Unlock Setting This function allows to lock one or several operation settings of N O T E the indoor unit from the remote controller. Parameters F8, F9, F1 and FB must be set to 01 (available) in order •...

  • Page 86: Hotel Mode Setting

    SERVICE & INSTALLATION MENU 5 Press “ ” or “ ” to select “Save” and press “OK” to change 6.2.3 Hotel Mode Setting password. This setting enables or disables the hotel mode. Select “Not Save”, the screen returns to Step3. Press “...
  • Page 87 SERVICE & INSTALLATION MENU 1 Select “Service Menu” on the Service & Installation screen Change the power savings level and press “OK”. Select “Sav: LOW (MED/HIGH)” and press “OK”. Press “ ” or 2 Select “Power Saving Details Setting” and press “OK”. “...
  • Page 88 SERVICE & INSTALLATION MENU  Indoor Unit Rotation Control Setting Change the Control Method • Select “Control” and press “OK”. Item Description • Press “ ” or “ ” to select the item to set and press “OK”. It changes as follows: “Address Order” ↔ “Temperature Order” Indoor units are set to Fan mode in Address ↔...
  • Page 89 SERVICE & INSTALLATION MENU  Intermittent Control Setting Cool/Dry Mode Heat Mode Normal Mode Item Description Power Normal Mode 20 minutes 25 minutes ⇔ Fan ⇔ Fan Mode 10 minutes Saving: LOW The power saving level can be set. Level Change Mode 5 minutes Normal Mode Power...

  • Page 90: Temperature Range Restriction

    SERVICE & INSTALLATION MENU 6.2.5 Temperature Range Restriction 6.2.7 Main/Sub Display Setting The temperature range can be set by operating the remote The display of the main / sub setting of the remote controller can controller. be deactivated from this menu. 1 Select “Service Menu”...

  • Page 91: Room Name Setting

    SERVICE & INSTALLATION MENU 6.2.8 Room Name Setting 6.2.9 Contact Information Registration Register the installation location of the controller. Register a service contact (service address and service telephone number are recommended). 1 Select “Service Menu” on the “Service & Installation” screen and press “OK”.

  • Page 92: Simple Maintenance

    SERVICE & INSTALLATION MENU 6.2.10 Simple Maintenance  This menu is available if the optional setting “JA” is set to List of Simple Maintenance Function 01 from the function selection menu. From this menu, some Item Note parameters like operating times and some items of the check Compressor Time mode can be displayed from the “Service Menu”.

  • Page 93: Check Menu

    SERVICE & INSTALLATION MENU 6.3 CHECK MENU This menu displays various statuses of the air conditioner. 2 Press “ ”, “ ”, “ ”, or “ ” to select the indoor unit. Press “OK”. If there is only one indoor unit connected to the wired remote 1 Select “Check Menu”...
  • Page 94 SERVICE & INSTALLATION MENU  Checking the current operating condition Contents in Check 1 Temperature Status Display When Auto Cool/Heat is activated with the dual set point option, both Set Temp. temperature settings are displayed by “b1” parameter Temperature indication Normal Inlet air temperature Thermistor is disconnected...
  • Page 95 SERVICE & INSTALLATION MENU Continue from previous page Stopping cause state indication Refer to “Cause of Indoor Unit Stoppage” Stopping cause state indication Continue to next page  Cause of Stoppage Code Cause Operation OFF, Power OFF Thermo-OFF Alarm*1 Freeze Protection, Overheating Protection Instantaneous Power Failure at Outdoor Unit/Reset*2 Instantaneous Power Failure at Indoor Unit/Reset*3 Stoppage of Cooling Operation due to Low Outdoor Air Temp.
  • Page 96 SERVICE & INSTALLATION MENU Continue from previous page Abnormality counter Times of abnormality Times of power failure This number is incremented when transmission error occurs between Times of abnormal transmitting Wired Remote Controller and Indoor units and the error remains for 3 (remote controller-outdoor unit) minutes or longer.
  • Page 97 SERVICE & INSTALLATION MENU Continue from previous page Electronic Expansion Valve IDU Electronic Expansion Valve (%) ODU Electronic Expansion Valve (%) ODU Electronic Expansion Valve 2 (%) For flexible multi-type, the value of Unit A is indicated. ODU Electronic Expansion Valve B (%) Compressor status (reference) The total value is displayed if multiple compressors are operating.
  • Page 98 SERVICE & INSTALLATION MENU  Data just before the latest failure Contents of Check 2 Press “∨” to go to the next page. Press “∧” to go to the previous page. Continue from previous page Temperature Status Display Inlet Air Temperature Corresponds to item “b2”...

  • Page 99: Alarm History Display

    SERVICE & INSTALLATION MENU 6.3.2 Alarm History Display 6.3.3 Model display function Alarm history can be browsed and deleted. Model type, unit type, and unit number are shown (this information is available only for compatible indoor units) 1 Select “Alarm History Display” on “Check Menu” and press “OK”.

  • Page 100: Check Pcb Of The Units

    SERVICE & INSTALLATION MENU 6.3.4 Check PCB of the Units  Unit check result This function is used to Self check the PCB of the indoor and outdoor units. Indoor Unit PCB 1 Select “Check PCB of the Units” on the “Check Menu” Normal screen and press “OK”.

  • Page 101: Self Check

    SERVICE & INSTALLATION MENU 6.3.5 Self check Self check of the remote controller PCB can be performed. (Red) During the test, the internal memory of the controller (EEPROM) can be cleared and reset to factory settings. 1 Select “Self check” on the “Check Menu” screen and press “OK”.
  • Page 102 SERVICE & INSTALLATION MENU (Grey) 7 Buzzer check Press “ ” on Wired Remote Controller. Buzzer volume gradually increases. 06: Buzzer check 07: Transmission check 4 Back light check 03: Back light check 04: Run indicator check 8 Transmission check Wired Remote Controller then automatically starts transmission checking.
  • Page 103 SERVICE & INSTALLATION MENU  11 Flash memory check EEPROM process Check flash memory. Ⓐ Ⓐ 1 Clear EEPROM N O T E Wired Remote Controller automatically starts EEPROM clear process. The checking process does not proceed to the next if “999” is shown in the area indicated with Ⓐ...

  • Page 104: Screen Display Setting Menu

    SCREEN DISPLAY SETTING MENU 7 SCREEN DISPLAY SETTING MENU 1 Select “Screen Display Setting” on the “Menu” screen and press “OK”. Time and Date settings are recommended as this will be used by other functions like alarm history and timers. 2 Press “...

  • Page 105: Time Format

    SCREEN DISPLAY SETTING MENU 5 Press “ ”, or “ ” to select “yyyy/mm/dd/hh/mm”. 4 Press “ ” to return to Step2. Press “ ” or “ ” to change the settings. Press and hold “ ” or “ ” to increase or decrease continuously.

  • Page 106: Run Indicator Brightness

    SCREEN DISPLAY SETTING MENU 7.1.3 Run Indicator Brightness 7.1.4 Display Adjustment 1 Select “Run Indicator Brightness” on the “Screen Display Function Action Setting” screen and press “OK”. Backlight Brightness Adjust the brightness of the backlight. Change the time when the backlight turns dark Backlight Dim after inactivity.
  • Page 107 SCREEN DISPLAY SETTING MENU  Backlight Dim 2 Select “Baclight OFF” and press “OK”. 1 Select “Display Adjustment” on the “Screen Display Setting” screen and press “OK”. 3 Press “ ” or “ ” to select the off time intervals and press “OK”.

  • Page 108: Temperature

    SCREEN DISPLAY SETTING MENU 3 Press “ ” or “ ” to select between light and dark theme and press “OK”.  Display of Thermistor Temperature 1 Select “Temperature” on the “Screen Display Setting” screen 7.1.5 Temperature and press “OK”. Function Action Change temperature unit and width.

  • Page 109: Language Setting

    CONTACT INFORMATION MENU 7.1.6 Language Setting 7.1.7 Keypad Touch Sound This function is to change the displayed language. This function is to change the touch sound on keypad. Selectable language: 1 Select “Keypad Touch Sound” on the “Screen Display Setting” screen and press “OK”. PC-ARFG2-E(B)1 EN/ES/FR/IT/DE PC-ARFG2-E(B)2...

  • Page 110: Hotel Mode Setting

    HOTEL MODE SETTING 9 HOTEL MODE SETTING When the advanced wired remote controller is set to hotel mode, the home screen and menu are changed. For how to set the “6.2.3 Hotel Mode Setting”. hotel mode, refer to • When the air conditioner is OFF Press “...
  • Page 111 HOTEL MODE SETTING Menu Fan Speed   Louver     Language: Change to the desired language. Language  Off Timer: Turn off the air conditioner after the desired time.  Screen Display Setting: Make settings for screen display. “7 Screen Display Setting menu”.

  • Page 112: Language

    HOTEL MODE SETTING 9.1 LANGUAGE 2 Press “ " or " " to select the language and press "OK". 1 Press “ ” or “ ” to select “Language” menu in the home screen. 9.2 OFF TIMER N O T E can be set even when the air conditioner is stopped.
  • Page 113 IN ALARM CONDITION 10 IN ALARM CONDITION Indoor unit number (Refrigerant system-address number) When more than one indoor unit is connected, press " " or " " to show other indoor units. Installed unit number The RUN indicator flashes. • •...
  • Page 114 Johnson Controls-Hitachi Air Conditioning Spain, S.A.U. Ronda Shimizu, 1 - Políg. Ind. Can Torrella 08233 Vacarisses (Barcelona) Spain © Copyright 2022 Johnson Controls-Hitachi Air Conditioning Spain, S.A.U. – All rights reserved. PMEN0601 rev.0 - 07/2022 Printed in Spain...

Table of Contents