Programming Channel Memory - Toshiba CF19F30 Owner's Manual

Programming Channel Memory
TV/CABLE function
MENU TVVIDEO Y¥VOLUMEA YCHANNELA POWER
1 Press POWER to turn on the TV.
e——- abv - ——+ 2 Press MENU repeatedly until the Setup
menu is displayed on the screen.
CHANNEL W/A
—/+
3 Press ADV repeatedly until "TV/CABLE"
ADV
POWER
is displayed in magenta.
MENU
4 Press </- or »/+ until the mode that
corresponds to your TV signal system is
displayed in magenta.
Each time you press the button, the TV*,
STD*, HRC * or IRC* mode will be
POWER selected in order.
CHANNEL 11 Press MENU repeatedly until the Setup
A/V menu is displayed on the screen.
P/+
TOSHIBA
3 Press </- or P/+ to start channel pro-
gramming.
The TV will automatically cycle through
all the TV or CABLE channels depending
on the mode selected, and store active
channels in the channel memory.
* This TV receives the following TV
signals:
1. TV: TV broadcasts signals.
(VHF channels 2 through 13 and
UHF channels 14 through 69) 4
2. STD CABLE: Standard cable TV
signals.
3. HRC CABLE: Harmonic Related Carrier
cable TV signals.
4. IRC CABLE: Incremental Related
Carrier cable TV signals.
When channel programming is complete,
you will see the message at the right.
If you are not sure what CABLE system
they are using, consult your local cable 5
company.
aie
been done properly.
8
Ti MES 2 MIN
TV/CABLE: [TV]STD HRC IRC
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
[TV]STD HRC IRC
TO SELECT !TEM PUSH ADV
TO CONTROL PUSH - +
CH PROGRAM function |
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
CH PROGRAM
TV 24
CH PROGRAMM! NG
COMPLETED
TV