Receiving Beamed Information; Tips On Beaming Information - Sony clie PEG-N610C Operating Instructions Manual

Beaming between your Sony CLIE Handheld and another Palm
®
OS PDA

Receiving beamed information

1
Turn on your CLIE handheld.
2
Point the IR port directly at the IR port of the other Palm OS
PDA handheld transmitting the data.
The Beam dialog box is displayed. Beaming data starts.
You can select the category in which you save the data in a dialog box.
3
Tap Yes.
The data is saved to the unfiled category.
Note
If Beam Receive in the Preferences menu is set to Off, you cannot receive data using the
beaming feature. Before beaming data, make sure to set Beam Receive to On.

Tips on beaming information

• Incoming data or application should be placed in the Unfiled category.
• You can press the Address Book
your business card.
• You can use Graffiti to beam the current entry (
tap ).
Chapter4
Communicating using your Sony CLIE Handheld
button for about two seconds to beam
then , or and then
142