5. Slide the release tab to lock the module [2].
6. Install the:
a)
Front bezel
b)
Side cover
7. Follow the procedure in
Hard drive and optical drive module
Removing the hard drive and optical drive module
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
HDD assembly
3. To release the hard drive and optical drive module:
a) Unroute the optical drive cables [1] and hard drive cables [2] through the retention clip and HDD-ODD release tab respectively.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
33