Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung DV22K6800EW/A1-11
Summary of Contents for Samsung DV22K6800EW/A1-11
- Page 1 Dryer User manual DV22K6800** DV6800K_DC68-03650A-08_EN.indd 1 2020-05-11 3:01:56...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Before installation Key installation requirements Location considerations Ducting requirements Exhausting requirements Electrical requirements Installation What’s included Step-by-step installation Exhaust ducting guide Changing the direction of the exhaust duct (optional) - Page 3 Maintenance Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet Cycle chart English 3 DV6800K_DC68-03650A-08_EN.indd 3 2020-05-11 3:01:56...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. -
Page 5: California Proposition 65 Warning
CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes. •... - Page 6 Safety information Do not reach into the appliance if the drum is moving. Do not install or store this appliance where it will be exposed to the weather. Do not tamper with internal controls. 10. Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user-maintenance instructions or in published user- repair instructions that you understand and have the skills to carry out.
-
Page 7: Warnings
WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed. - Page 8 Safety information • Do not use fabric softeners or products to eliminate static unless the softener or product is recommended for dryer use by the manufacturer of the fabric softener or product. • Clean the lint screen before or after each load. •...
-
Page 9: Before Installation
Before installation Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. - Page 10 Before installation NOTE When the exhaust duct is installed at the rear of the dryer, the rear must have at least 5.5 inch (140 mm) clearance. 5.5” (140 mm) Side by side installation 1 in. (25 mm) 25.8 in. (655 mm) 23.6 in.
- Page 11 6 in. (152 mm) 3 in. (76 mm) 67 in. (1702 mm) WARNING Samsung’s washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. English 11 DV6800K_DC68-03650A-08_EN.indd 11 2020-05-11...
-
Page 12: Ducting Requirements
Before installation Ducting requirements Recommended Use only for short-run installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° Rigid Rigid elbows 80 ft. (24.2 m) 60 ft. (28.3 m) 60 ft. (28.3 m) 45 ft. (13.7 m) 45 ft. -
Page 13: Exhausting Requirements
Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl • Refer to the local codes. space, or a concealed space of a building. WARNING Exhausting the dryer to the outside will •... -
Page 14: Electrical Requirements
Before installation Electrical requirements The wiring diagram is located on the plate • The plug must be plugged into an under the control panel or rear frame. appropriate outlet that is properly installed and grounded in accordance WARNING with all local codes and ordinances. •... - Page 15 U.S. only Canada Only Most U.S. dryers require a 120 / 240 volt, A 120 / 240 volt, 60 Hz AC approved 60 Hz AC approved electrical service. electrical service fused through a Some require 120 / 208 volt, 60 Hz 30-ampere fuse or circuit breaker on both approved electrical service.
-
Page 16: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung service center or the retailer. Dryer at a glance 01 Top cover... - Page 17 Accessories & tools Provided accessories DRYER STACKING KIT Stacking Kit Cover Plate (Canadian models only) Required tools Pliers Cutting knife Nut driver Level Philips screwdriver Duct tape Wrench WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.
-
Page 18: Step-By-Step Installation
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. - Page 19 STEP 2 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow the instructions on this page or the next page. Instructions for a 3-wire system are on this page. Instructions for a 4-wire system are on the next page. For a 3-wire system Loosen or remove the screws from the center terminal block.
- Page 20 Installation For a 4-wire system Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
- Page 21 • Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. • A strain relief must be used. • Do not loosen the nuts already installed on the terminal block. Be sure they are tight. •...
-
Page 22: Exhaust Ducting Guide
Installation STEP 4 Final Check When installation is complete, confirm that: • The dryer is plugged into an electrical outlet and grounded properly. • The exhaust ductwork is connected and the joints are taped. • You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. •... -
Page 23: Changing The Direction Of The Exhaust Duct (Optional)
Changing the direction of the exhaust duct (optional) WARNING Before performing this exhaust installation, disconnect the dryer from its electrical supply. Wear gloves to protect your hands and arms from sharp edges when working inside the cabinet. Side venting Detach the right (A) or left (B) side knockout as desired. - Page 24 Installation Reconnect the cut portion of the duct (D), and then fasten it to the ramp on the appliance base with the screw (C) which you set aside in Step 2. Connect a duct to an elbow, and then tape the duct and the elbow together with duct tape.
- Page 25 Cover the back opening with a cover plate (G). WARNING Never leave the back opening uncovered. It must be covered with a cover plate. Bottom venting Detach the bottom knockout (A). Pull the duct out of the dryer, and then remove the screw (B) from the duct.
- Page 26 Installation Reconnect the cut portion of the duct (C), and then fasten it to the ramp on the appliance base with the screw (B) which you set aside in Step 2. Insert the elbow (D) through the rear hole and connect it to the duct (C). Rotate the elbow (D) through the bottom opening.
- Page 27 Cover the back opening with a cover plate (F). WARNING Never leave the back opening uncovered. It must be covered with a cover plate. English 27 DV6800K_DC68-03650A-08_EN.indd 27 2020-05-11 3:02:00...
-
Page 28: Switching The Door Position
Installation Switching the door position To reverse the direction of the door, we recommend that you contact a qualified technician. Unplug the power cord of the dryer. Remove the two hinge screws from the door, and then remove the door by lifting it up slightly. - Page 29 Locate and remove the 9 screws from the door as shown. Remove the door lever. Remove the door frame. English 29 DV6800K_DC68-03650A-08_EN.indd 29 2020-05-11 3:02:00...
- Page 30 Installation Rotate the door glass 180°. Reassemble the door frame and the door lever. English DV6800K_DC68-03650A-08_EN.indd 30 2020-05-11 3:02:01...
- Page 31 Move the location of the screw, used to fix the door hinge, as shown. 10. Remove the lever cover by pressing the hook on it. 11. Put the lever holder on the other side as shown. English 31 DV6800K_DC68-03650A-08_EN.indd 31 2020-05-11 3:02:01...
- Page 32 Installation 12. Insert and tighten the two hinge screws. 13. Insert and tighten the two screws on the opposite side of the door hinge. English DV6800K_DC68-03650A-08_EN.indd 32 2020-05-11 3:02:01...
-
Page 33: Before You Start
Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a • Overloading reduces the tumbling time. action, resulting in uneven drying and •... -
Page 34: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel Turn the cycle selector to select a desired cycle. When a cycle is 01 Cycle selector selected, the cycle indicator lights up. - Page 35 Press to change the temperature of the current cycle. • High: For sturdy cottons or those labeled Tumble Dry. • Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. • Med Low: For heat lower than Medium. Use to dry synthetic or 04 Temp.
-
Page 36: Simple Steps To Start
Operations Indicators Drying in progress Drum Light Cooling in progress Sound Off Wrinkle Prevent in Child Lock progress Cycle is complete My Cycle Filter Check Mixed Load Bell Simple steps to start 1. Press Power to turn on the dryer. 2. -
Page 37: Cycle Overview
Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dry Level. Cycle Description NORMAL For most fabrics including cottons and linens. For drying items made out of heavy fabrics, such as jeans, HEAVY DUTY corduroys, or work clothes, with high temperature heat. -
Page 38: Cycle Guide
Operations Cycle guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Cycle Description Follow the care label instructions or dry using NORMAL. Bedspreads &... -
Page 39: Special Features
Smart Care to check the status of the dryer on a smartphone. NOTE To use Smart Care, you must have the After 2 minutes of inactivity, the drum Samsung Smart Care app installed on your light automatically turns off. smartphone. Sound On/Off NOTE To turn off the dryer’s notification beeps... - Page 40 Operations If an information code appears on the dryer, follow these steps: 1. Press and hold Mixed Load Bell for 3 seconds to activate Smart Care. 2. Open the Smart Care app on your smartphone. 3. Put the smartphone’s camera close to the display of the dryer.
-
Page 41: Maintenance
Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. -
Page 42: Troubleshooting
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet. - Page 43 Problem Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • Make sure the dryer is leveled properly as outlined in the Is noisy. installation instructions. • It is normal for the dryer to hum due to the high velocity of air moving through the dryer drum, fan, or exhaust system.
- Page 44 Extended time. reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. English DV6800K_DC68-03650A-08_EN.indd 44 2020-05-11 3:02:02...
-
Page 45: Information Codes
• If this information code remains, contact a Samsung service center. Incorrect door switch. • Contact a Samsung service center. If any information code keeps appearing on the screen, contact a Samsung service center. English 45 DV6800K_DC68-03650A-08_EN.indd 45 2020-05-11 3:02:02... -
Page 46: Specifications
Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, Only non-chlorine (color-safe) ironing, and dry cleaning. The use of bleach (when needed) symbols ensures consistency among garment manufacturers of domestic Tumble dry and imported items. -
Page 47: Protecting The Environment
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from... -
Page 48: Specification Sheet
Specifications Specification sheet Type Front loading dryer A. Height 33.5” (850 mm) B . Width 23.6” (600 mm) Dimensions C. Depth 25.8” (655 mm) D. Depth with door 44.2” (1123 mm) open 90° Net Weight 89.1 lb (40.4 kg) Heater rating 2200 W (elec.) English DV6800K_DC68-03650A-08_EN.indd 48... -
Page 49: Cycle Chart
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about ½ full. •... - Page 50 Specifications NOTE : factory setting, : can be selected • Temperature setting Time Cycle Extra High Medium Med Low setting NORMAL HEAVY DUTY SANITIZE WOOL Sensor Dry DELICATES ACTIVE WEAR TOWELS PERM PRESS ...
- Page 51 If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
- Page 52 Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. EXCLUSION OF IMPLIED WARRANTIES...
- Page 53 PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
- Page 54 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 55 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
- Page 56 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English DV6800K_DC68-03650A-08_EN.indd 56 2020-05-11 3:02:06...
- Page 57 Memo DV6800K_DC68-03650A-08_EN.indd 57 2020-05-11 3:02:06...
- Page 58 Memo DV6800K_DC68-03650A-08_EN.indd 58 2020-05-11 3:02:06...
- Page 59 Memo DV6800K_DC68-03650A-08_EN.indd 59 2020-05-11 3:02:06...
- Page 60 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT 1-800-SAMSUNG (726-7864) U.S.A www.samsung.com/us/support 1-844-SAM-PAYS (726-7297) 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) CANADA 1-844-SAM-PAYS (726-7297) www.samsung.com/ca_fr/support (French) DC68-03650A-08 DV6800K_DC68-03650A-08_EN.indd 60 2020-05-11 3:02:06...