Date/Time Setting.17 - Hitachi VM-E110E Instruction Manual

8mm video camera/recorder
Hide thumbs Also See for VM-E110E:
Table of Contents

Advertisement

DATE/TIME SETTING
The date and time can be recorded on your tapes to act as a handy reference when viewing them at a
later time. Use the following procedure to set up this display for the current date and time.
Make sure that the current time is displayed correctly before you start recording.
NOTE: Be sure to insert the clock battery before setting the date and time. Although the date and time
can be set without the clock battery inserted, they will disappear when the battery providing power to
the camera/recorder is removed.
1. Slide the Operate switch to "CAM" while hold¬
ing the small red button in the Operate switch
down.
2. Press DATE/TITLE button.
"0:00"
and
"1/1/1995"
appears
in
the
viewfinder and "1" flashes.
w
0:00
_,1/ 1/1995
3. Press F.F button to select correct date. Hold
button down to advance rapidly. If you go past
the date you want to set, press REW button.
When the correct date appears, press STOP
button.
0:00
_5/ 1/1995
4. Press F.F button to select correct month.
Hold button down to advance rapidly. If you go
past the month you want to set, press REW
button. When the correct month appears,
press STOP button.
Press F.F or REW button to select year, and
then press STOP button.
o': 00
5/11/1996
6. Press F.F or REW button to select correct hour,
and then press STOP button.
7. Press F.F or REW button to select correct
minute.
6:^Q:
_5/11/19£f6
8. After setting to the correct minute, press
DATE/TITLE button to change the display and
start the internal clock.
It is recommended that you press DATE/TITLE
button to match the time signal.
■ To correct date/time after starting the
date/time
1. Press and hold DATE/TITLE button, and then
press STOP button. The date starts flashing.
2. Correct the incorrect digit by using F.F, REW
and STOP buttons.
■ To correct date/time during programming
1. Press STOP button repeatedly until the digit
that is incorrect flashes.
2. Correct the incorrect digit by using F.F, REW
and STOP buttons.
0:00
5/^^/'^99g
'
'
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-e110e uk

Table of Contents