Siemens SN87YX03CE/47 Information For Use page 48

en Troubleshooting
Fault
E:3200 or indicator
for water supply lights
up.
E:3400 lights up.
E:6102 lights up.
48
Cause and troubleshooting
Water tap is jammed or furred up.
Turn on the water tap.
▶
The flow rate must be at least 10 l/min when the
water supply is open.
The filters in the water connection of the supply or
AquaStop hose are blocked.
Switch off the appliance.
1.
Pull out the mains plug.
2.
Turn off the water tap.
3.
Unscrew the water connection.
4.
Remove the filter from the inlet hose
5.
Clean the filter.
6.
Re-insert the filter in the inlet hose.
7.
Screw the water connection back on.
8.
Check the water connection for leaks.
9.
Restore the power supply.
10.
Switch the appliance on.
11.
Water is continuously running into the appliance.
Turn off the water tap.
1.
Call Customer Service → Page 54.
2.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
Clean the wastewater pump.
1.
→ "Clean wastewater pump", Page 53
Secure the cover of the wastewater pump so it
2.
clicks into position.
→ "Clean wastewater pump", Page 53