Pioneer CT-1270WR Service Manual page 4

C T - 1 2 - 7 0 W R C B K 3
T A P E S E L E C T O R
zyxwvutsrqponmlkjihgfedcbaZYXWVUTSRQPONMLK
\I] s w i t c h e s
T a p e counter R E S E T button
D e c k II T A P E C O U N T E R |
Three-digit counter indicates the current position on the tape in ;
Deck II. I
The selectors allow the bias and equaiization characteristics during
recording, and equaiization characteristics during playback, to be
selected on Deck II in accord with the type of tape used.
Normal tape:
Release the left-hand switch to the "out" position ( M . NORM).
CrOj tape:
Press the left-hand switch and set it to the " i n " position
( HIGH) and rease the right-hand switch to the "out" position
( M
CrO;).
Metal tape:
Press both the left and right-hand switches to the " i n " position
( m HIGH, « . M E T A L ) . •
A/O ff;
Deck I is provided witli an automatic tape selector mechanism.
D e c k I (for playback) D e c k II (for playback/recording)
- M i
^1 lEITT
P H O N E S j a c k
D O L B Y B - C NR s w i t c h e s
Make sure that the switch is set to the same setting when playing
back tapes recorded with the Dolby B or C type noise reduction
system.
Dolby NR OFF:
Release the left-hand switch to the "out" position (
zyxwvutsrqponmlkjihg
M. OFF).
Dolby B-type NR ON:
Press the left-hand switch and set it to the " i n " position I ON) and
release the right-hand switch to the "out" position ( M. B ) .
Dobly C-type NR ON:
Press the left and right-hand switches to the " i n " position ( m. ON,
mt
C).
• Noise reduction manufactured under ücense from Dolby
Laboratories Licensing Corporation.
• "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
B