Table of Contents
Advertisement
Dryness
Display symbol
setting
Extra dry‐
ness
Standard
dryness
4. Touch the Start/Pause button
repeatedly until you reach the
desired dryness level.
5. To memorise the setting touch and
hold down the Time Dry and + Anti
Crease buttons at the same time for
approximately 2 seconds.
Changing the dryness
setting will change the cycle
duration.
In case of wifi network
connected machine, when
the new setting is
memorized a ProSense
bars animation is performed
for a few sec to indicate that
your appliance is updating
data used by syncDry
function to the cloud. If you
interrupt this operation (like
switching off the machine or
moving the knob) the data
synchronization will be done
during the first wi-fi
reconnection.
11.3 Water container
indicator
By default, the water container indicator
is on. It comes on when the program is
completed or when it is necessary to
empty the water container.
It is recommended to install
included draining kit to
automatically drain the water
from the water container. In
this case we can deactivate
the indicator of the water
container.
Deactivating the tank
indicator
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down Silent and
End Signal buttons at the same
time.
One of 2 configurations is possible:
• the Tank indicator:
symbol
water container indicator is
permanently activated
• the Tank indicator:
symbol
water container indicator is
permanently deactivated
11.4 Operating hours counter
This function gives a possibility to display
the total operating time of the appliance
in hours, which is counted from the
moment it is first switched on. The actual
operating time of the cycles is shown
(does not include pauses or delayed start
time).
To visualise this value, proceed as
follows:
1. Switch the appliance on by pressing
the On/Off button.
2. Press and hold the Time Dry and
Dryness Level buttons for some
seconds.
3. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. if the operating
time is 1276 hours, the display shows
the text Hr for 2 seconds then 12 for
2 seconds followed by 76. This value
is displayed with a sequence of two
digits at a time: the first two digits
ENGLISH
25
is on if the
appears - the
is off if the
appears - the
Advertisement
Table of Contents
