Table of Contents
Advertisement
^<§> Changing the Flash Mode
You can cause the flash to fire for every shot or
suppress flash operation completely to suit the subject
or location.
Select the flash mode.
• Press the
button to select
the mode you want.
^ Each time you press the % <§>
button, each of the modes is
displayed and you can cycle
through them in the following way
AUTOL' g g
C v<@>H <- ® «- * ^
AUTO
V
Autoflash
In dark places and in backlit conditions, the flash fires
automatically.
Flash Distance Range
(with color print film)
Film speed
Wide-angle (23.5mm)
Telephoto (54mm)
100
0 45 to 3.2 m
(1 5 to 10 5 ft)
0 45 to 2.0 m
(1 5 to 6.6 ft)
ISO
200 '
0 45 to 4.5 m
(1 5 to 14.8 ft.)
0.45 to 2 8 m
(1 5 to 9 2 ft)
400
0.45 to 6 4 m
(1 5 to 21.0 ft)
0 45 to 4.0 m
(1.5 to 13 1 ft)
800
0 45 to 9.0 m
(1 5 to 29.5 ft.)
0.45 to 5.6 m
(1.5 to 18.4 ft.)
[5| You can select whether the autoflash mode initially set
when you switch the camera on is
AUTO V
or
AUTO
%■
Set the camera to the desired autoflash mode and then
switch the camera OFF.
You can use the CF2 Custom Function setting to specify
that whichever flash mode is active when you switch off the
camera should be stored in the camera's memory. (—► 36)
Advertisement
Table of Contents
