Advertisement
i]
e-iele
2. FRONT
PANEL
FACILITIES
@
POWER
SWITCH
(POWER)
Depress this switch to turn power ON and OFF.
Switch depressed — Power ON
Switch out
— Power OFF
When power is turned ON, the SPEED 33, DISC SIZE 12' 30, and
ARM ELEVATION lamp is illuminated.
@
SPEED
SELECTOR
SWITCH
(SPEED)/LAMP
(433
4 45)
Depress this switch until the lamp corresponding to speed of the
record to be played is illuminated.
When power is turned ON- the '33' lamp is illuminated.
"33" lamp illuminated — 33 1/3 rpm LP record playback
"45" lamp illuminated — 45 rpm EP record playback
@) RECORD
SIZE SELECTOR
SWITCH
(DISC SIZE)/LAMP
(@7° 17
© 12" 30)
Depress this switch until the lamp corresponding to the record size
is illuminated. When
power
is turned ON, the '12'' 30' lamp is
illumianted.
12" 30" lamp illuminated — 30 cm (12'') LP record playback
"7'°17" lamp illuminated —17 cm (7'') EP record playback
@ PLAYBACK START/STOP SWITCH
(START/STOP)
This
switch
is depressed
to start automatic
playback
or to stop
playback
in the middie
of a record.
© QUARTZ LOCK INDICATOR
(QUARTZ
LOCK)
This
lamp
illuminates
indicating accurate
speed
of 33 1/3 or 45
rpm.
6) REPEAT
PLAYBACK
SWITCH
(REPEAT)/LAMP
( ">
)
Depressing
this switch will illuminate
the "REPEAT"
lamp and
repeat playback of the present record.
@
TONEARM
POSITIONING
SWITCH
(ARM
LOCATION)/LAMP
( <->
)
Depress
this switch
to move
the tonearm
to the left or right in
the
manual
playback
mode.
Depressing
the
<
switch
moves
the tonearm
to the
left and
causes the < lamp to biink.
Depressing
the
B
switch
moves
the tonearm
to the right and
causes the & lamp to blink.
The tonearm
movement
speed is variable in two steps depending
on the pressure applied to the switch.
Depress firmly for fast speeds, lightly for slow speeds.
ARM ELEVATION SWITCH
(ARM-ELEVATION)/LAMP
( ¥ )
Depress this switch
to raise or lower the tonearm
in the manual
playback
mode.
When
power switch is turned ON,
this lamp is
illuminated.
Lamp illuminated { ¥ ) — tonearm raises
Lamp extinguished
— tonearm lowers
@ CARTRIDGE (PC-4MC)
HEADSHELL
@ TONEARM
@ ARM CLAMP KNOB (ARM CLAMP)
Turn
this knob
to lock
the tonearm
into the arm
clamp.
LOCK position — tonearm locked
OPEN position — tonearm
lock released.
(Keep
lock in this posi-
tion for normal operations.)
3
STYLUS TRACKING
FORCE ADJUSTMENT
WEIGHT
Rotate this weight to adjust vertical tracking force.
(@ CENTER SHAFT
@ PLATTER
(® RUBBER PLATTER MAT
@ CABINET
DUST COVER
Advertisement
