Radio Operation - Hitachi TRK-8080E User Manual

POWER (MAINS) REQUIREMENTS:
Operation using Batteries: Remove the battery compartment lid
and install) batteries as shown in the diagram in the com-
partment with the ribbon underneath. The batteries can easily
be removed by pulling the ribbon. (See diagram @7) ).
Note: When the unit is not in use or used on AC power (mains)
for a long period of time, the batteries should be taken out
of the battery compartment.
Battery check: Set the Function selector (to the ''"RADIO"' position:
if the pointer of the meter @) is in the Black area, the batteries
are strong enough for use. If it is in the Red area, the batteries
are too weak and the recorder will not operate adequately. Change
the batteries.
Operation using car battery: To operate using a car battery, insert
one end of the optional adaptor into the DC 12V socket and
the other end into the cigarette lighter of your car. This will auto-
matically disconnect the batteries.
Operation using AC power (mains): \nsert one end of the AC
power (mains) lead into the AC socket @9 and the other end into
a convenient AC outlet. This will automatically disconnect the
batteries. To return to battery operation, disconnect the AC power
(mains) lead from the AC socket @9 .
Notes: 1. Disconnect the AC power (mains) lead plug from AC
outlet when the unit is not to be used with AC power
(mains) for a long period of time or you are away from
home.
2. Operation indicator @)) lights when the unit is in the
operating state.
RADIO OPERATION:
1. Set the Function selector @ to the "RADIO" position.
2. Set the Band selector (2 to desired positon.
4. Adjust the antenna (aerial).
FM reception: Extend the Telescopic antennas (aerial) 6) to its
full length.
Changing antenna (aerial) direction is recommended for the best
reception.
After tuning in an FMstation set the AFC button @ to the "ON"
position.