Advertisement
3.4
CROSS CHANNEL OPERATION
Use Table 1 for a description of which switch settings to use for each kind of
operation.
The station gives complete flexibility for cross channel operation
and fixed channel
operation.
The light-emitting-diode
indicators show
that
VFO is operating.
TABLE2.
Calibration Functions of the VFO-820 and TS-820
3.5
NON-SLIP RUBBER
When
your VFO-820
is placed on a table or the like, insert the supplied
non-slip rubber into the tapped hole at the right foot as viewed from the front.
This prevents VFO-820
from slipping on the table during operation.
TS-820 FUNCTION SWITCH
VFO-820
CAL-RMT
Calibrate TS-820
to marker signal
Calibrate TS-820
to VFO-820
Calibrate VFO-820
to marker signal
Calibrate VFO-820
Calibrate TS-820
to marker signal
Calibrate TS-820
to VFO-820
Calibrate TS-820
to VFO-820
Calibrate TS-820
to VFO-820
CAL-FIX
Calibrate TS-820
to fixed channel
Calibrate VFO-820
to fixed channel
Calibrate VFO-820
to fixed channel
Calibrate TS-820
to fixed channel
Advertisement
