Table of Contents
Advertisement
BATTERY POWER OPERATION
DRY CELL BATTERY (OPTION)
1. Open the battery compartment lid as illustrated.
2. After inserting 10 "A-1" size flashlight batteries into the
battery sleeve (provided in the battery compartment of the
set), install it into the battery compartment as illustrated.
Be careful about the polarity of each cell.
3. Closed the battery compartment lid.
NOTES: • The BATTERY CHARGE switch should be set to
the "OPERATE"position.
• Be sure to disconnect the AC or DC power cord
from the AC or DC POWER IN PUT SOCKET of the
set when using the set from the batteries.
• Exhausted batteries may leak and damage the set
BATTERY CHECKING
1. Press the POWER switch © to the "ON" (IN) position.
2. Press the DIAL LIGHT/BATTERY CHECK button ® .
3. The
BATTERY
INDICATOR
(left VU/SOUND LIGHT
EMITTING DIODE LEVEL INDICATOR) should indicate
into the "FULL" area as shown in illustration.
If the indicatordoes not reach the "FU LL" area, the batteries
are exhausted and ail batteries must be replaced with new
ones. If Rechargeable Battery Pack (Model NTP-10, optional)
is used, recharge them.
LEVEL
-20
10
7
3
0
+3
-20
DIAL LIGHT
/BATTERY CHECK
Advertisement
Table of Contents
