Download Print this page
Sony TA-N110 Service Manual

Sony TA-N110 Service Manual

Stereo power amplifier

Advertisement

Quick Links

es
ae eee
: 8
a
as
ss
eee
ron
ee
serene
se =
ae
:
sorts
seasenesinsecs
os
om
an
ee
SRE
=
=
ee
Ss
8
Bio
oe
cman
AEP Mode!
UK Model
_E Model
S
ee
REPLY Beh seca
i aero
AP auarga
By
ay
AS
w
i
Z
a,
so
aa
SPECIFICATIONS.
re
:
Signal-to-noise ratio
|
Audio power specifications
105 dB (input shorted)
,
Speaker output
(US model)
POWER OUTPUT AND TOTAL HARMONIC
Stereo: 6 - 16 ohms
.
Mono: 8 - 16 ohms
DISTORTION:
;
.
(Models for Except US)
With 8 ohm loads, both channels driven,
Stereo/mono: 6 - 16 ohms
from 20 - 20,000 Hz; rated 100 watts per
"eee
channel minimum
RMS power, with no
System
Complementary Darlington SEPP power amplifier,
|
|
:
P
with all stages direct coupled
more than 0.08% total harmonic distor-
powenrsaurements
tion from 250 milliwatts to rated output
PS models 120.¥ aC COUz
AEP, WG model: 220V — 50/60Hz
;
UK model: 240V
— 50/60Hz
|
E model:
120, 220, 240V — 50/60 Hz
Other specifications
Power consumption
US model: 110 watts
Models for Except US:
140W
Continuous RMS power output
(both channels driven simultaneously)
Dimensions
US model:
(US model)
Approx. 470 x 120 x 265 mm (w/h/d)
Stereo: 50 W + 50 W
(17x 4 %/4 x 10 '/2 inches)
|
(6 ohms, 0.08%, 20 Hz - 20 kHz)
Models for Except US:
.
Mono:
100 W (8 ohms, 0.08%, 20 Hz - 20 kHz)
Approx. 430 x 120 x 265 mm (w/h/d)
|
(Models for Except US)
(17 x 4 9/4 x 10 '/2 inches)
Stereo:
50W+50W
including projecting parts and controls
(6 ohms, 0.08%, 20 Hz - 20 kHz)
Weight
US model:
Mono:
100 W (6 ohms, 0.08%, 20Hz- 20kHz)
Approx. 5.9 kg (13 Ib 1 02), net
Dynamic power
Models for Except US:
:
(US model)
Approx. 5.3 kg (11 Ib 11 02), net
75 W + 75 W (6 ohms)
——
.
(Models for Except US)
Design and specifications subject to change without notice.
85 W + 85 W (8 ohms)
|
Power bandwidth (IHF)
|
12 Hz — 40 kHz (6 ohms, THD 0.12%)
(US model only)
Frequency response
STEREO/FLAT: 5 Hz — 200 kHz, +0/-3 dB
3D: 5 Hz - 80 Hz, +0/-3 dB (12 dB/Oct.)
Input sensitivity
STEREO:
180 mV (50 kohms)
3D: 110 mV (100 kohms)
FLAT:
180 mV (100 kohms)
STEREO POWER AMPLIFIE
SONY.
MICROFILM

Advertisement

loading