Cleaning the Fuel-Intake Screen (continued)
3. Remove the clamp
to the fuel pick-up tube.
4. Remove the fuel pick-up tube and rubber
bushing
5. Clean the screen
up tube.
6. Insert the fuel pick-up tube and rubber bushing
into the tank until the bushing is seated into the
tank.
7. Assemble the hose onto the fuel pick-up tube
and secure it with the clamp.
8. Lower and latch the seat.
Electrical System Maintenance
Disconnecting the Battery
Battery electrolyte contains sulfuric acid, which is fatal if consumed and causes
severe burns.
• Do not drink electrolyte and avoid contact with skin, eyes, or clothing.
• Wear safety glasses and rubber gloves.
• Fill the battery where clean water is always available for flushing the skin.
1. Prepare the machine for maintenance.
2. Open the battery-compartment cover.
3. Disconnect the negative battery cable
4. Slide the rubber boot off the positive battery-
cable clamp, and disconnect the positive
battery cable
3466-706A
that secures the hose
from the tank.
at the end of the fuel pick-
.
G425144
DANGER
.
G425155
Page 6–21
Maintenance: Electrical System Maintenance